Contact
Home > Products
Tellabs Products
From entertainment and telecom in the home to patient information in healthcare, from financial data to homeland security; fast and secure access has never been in more demand. Tellabs' sole focus is to deliver secure, scalable, sustainable access to optimize network performance.

Tellabs Network Solutions Suite

Tellabs Optical LAN delivers a network that is faster, more efficient, sustainable, cost effective, scalable and adaptable to future requirements than traditional copper-based infrastructure. Optical LANs eliminate the distance constraints, power requirements and heat dispersion issues of copper. They deliver increased network security, performance and operational efficiency. There is no doubt: Optical LAN is the future of enterprise access networks.
Tellabs Broadband provides an end-to-end cost-effective access solution that passes more than 5 million homes in North America. Our Multi-Service Access Platform (MSAP) enable you to get the most from your existing infrastructure. You'll save costs by reducing power consumption while gaining revenue opportunities by delivering services faster. Tellabs T1000 - the industry’s only Broadband Digital Loop Carrier platform that converges legacy copper and modern fiber connectivity.
Compare Products (0)
My Wishlist
Solutions
Series
Industries
Technologies
(74 Matches)

10 Gigabit Ethernet 226 (GbE226) – Limited Availability

T1000
  • Two 1G/10G Ethernet ports enhanced small form-factor pluggable (SFP+)
  • Four 1G Ethernet ports small form-factor pluggable (SFP)
  • Port filtering
  • Flexible configuration of 10G uplinks and 1G aggregation ports
  • QoS via IEEE 802.1P priority bits
  • IPv4 and IPv6 transparency
  • Six-Port Ethernet switch/hub with flexible uplink and tributary functionality
  • Flow control
  • Configurable Layer-2 learning
  • Spanning Tree forwarding
  • 1526 Byte Maximum Transmission Unit (MTU)
  • Standard SNMP based Ethernet statistics
  • Hardware support for future Synchronous Ethernet (SyncE) and IEEE 1588 Precision Time Protocol (PTP) timing
  • 6-Port Managed Layer 2-switch with VLAN awareness
  • SNMP based Ethernet statistics

1048 Channel Bank Assembly (CBA) Wall-Mount Swing Rack

T1000
  • Right-sized and low-cost customer premises Remote Subscriber Terminal (RST) solutions
  • Satisfies a wide variety of applications, such as FTTB, MTU, MDU, mobile backhaul and temporary events
  • Cost effective extension of the operational footprint of embedded base of Tellabs 1000 MSAP
  • Supports both copper and fiber-based transport while delivering TDM, xDSL and Ethernet services
  • Fill CBA1048 up to 100% with optimal plug-in cards for maximum capacity
  • The lowest cost, least disruptive and fastest time to market access solutions for service providers

140C Optical Network Terminal (ONT140C)

Optical LAN
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Enterprise grade G-PON ITU-T G.984 implementation
  • Advanced IP and Ethernet Functions
  • Both IEEE 802.3af Power over Ethernet (PoE) and high-power PoE+ IEEE 802.3at
  • Flexible mounting above or below the desk, within the raceways of modular cubiclefurniture, lockable enclosures, zone boxes in ceilings or raised floors and plenum brackets.
  • Supports IP-based voice, all forms of enterprise IP-based data traffic and all forms of enterprise IP-based video traffic
  • Built-in audible location indicator for easy installation and labeling identification
  • Supports Dante and CobraNet digital audio systems over IP

140W Integrated Connection Enclosure (ICE140W)

Optical LAN
  • The outdoor enclosure based is ideal for connectivity to exterior Wi-Fi WAPs and IP surveillance cameras.
  • Ubiquitous connectivity of all IP solution for voice, data and video over a Passive Optical LAN architecture that reaches to outside enterprise
  • Innovative fiber-based onnectivity and remote powering options that break traditional LAN architecture distance limitations
  • The Tellabs 14OW ONT is sold separate from the Integrated Connection Enclosure

140W Optical Network Terminal (ONT140W)

Optical LAN
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Building architects, engineers and consultants will enjoy the 140W ONT's paintable and changeable faceplate for matching a range of interior office decors
  • Built-in audible location indicator for easy installation and labeling identification
  • Enterprise grade G-PON ITU-T G.984 implementation
  • Both IEEE 802.3af Power over Ethernet (PoE) and high-power PoE+ IEEE 802.3at
  • Modular design with separate back box (with remote DC power termination and fiber cable slack storage), ONT electronics (with fiber termination) and a paintable/changeable faceplate
  • Advanced IP and Ethernet Functions
  • Supports IP-based voice, all forms of enterprise IP-based data traffic and all forms of enterprise IP-based video traffic
  • Supports Dante and CobraNet digital audio systems over IP

142R Optical Network Terminal (ONT142R)

Optical LAN
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Two analog POTS ports equipped with a SIP agent for VoIP support.
  • RF Video via standard coaxial interface supporting 54–870 MHz CATV AM-VSB service over the 1550 nm optical wavelength within PON
  • Advanced IP and Ethernet Functions
  • Supports IP-based voice, all forms of enterprise IP-based data traffic and all forms of enterprise IP-based video traffic
  • Both IEEE 802.3af Power over Ethernet (PoE) and high-power PoE+ IEEE 802.3at
  • Enterprise grade G-PON ITU-T G.984 implementation
  • Built-in audible location indicator for easy installation and labeling identification
  • Supports Dante and CobraNet digital audio systems over IP

180C Optical Network Terminal (ONT180C) – Limited Availability

Optical LAN
  • Network Access Control (NAC) enables individual user service profiles to automatically follow a user to any port on the Tellabs Optical LAN system, including service profile and security settings
  • Eight (8)10/100/1000 Gigabit Ethernet interfaces with Power over Ethernet support for 8-ports of 4PPoE supporting 802.3af/at/bt
  • Fast and efficient IP endpoint provisioning, including power management, monitoring and configurations with Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED)
  • Data, VoIP, unified communications and IP video in many forms (e.g., entertainment, surveillance, conferencing)
  • Wireless access points, surveillance, security, automation, access control and other corporate services
  • Uses Tellabs’ industry-leading software-defined traffic management, security, provisioning and quality of service mechanisms
  • Best practice for network design calls for a total number of sixteen (16) ONT180C on the QOIU7 (128 UNIs) and 64 on the OIU8 (512 UNIs)
  • Operates seamlessly with Tellabs’ complete line of OLTs and along side all ONTs
  • Supports Dante and CobraNet digital audio systems over IP

1RU Fan Tray Unit

T1000
  • Temperature control and fan speed control
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • A test switch on the fan tray front panel allows the fans to be manually tested for correct functioning.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • In the event of fan tray failure, the fan tray alarm relays communicate with the appropriate alarm monitoring interface.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans

52EU 1000-Line Remote Outdoor Cabinet

T1000
  • In controlled environments, if the composite clock signal degrades, ETI provides Stratum 3E holdover using historical timing data
  • Provisionable Stratum levels: 3, 3 with 3E holdover, 4, and SONET
  • LET or RST operation (primary shelf)
  • Up to Stratum 3/3E free-run accuracy
  • Jitter and wander reduction of external timing source
  • A second ETI can be installed for standby operation
  • Telcordia compliant design cabinet is expandable from four shelves to eight
  • Fiber splice and distribution options
  • -48 VDC powered cooling fans
  • Separate vented battery compartment and battery back-up options
  • Standard surge protection
  • Copper line protection in separate compartment (non-cross-connect configurations)
  • Hex key lock (padlockable for additional security)
  • Synchronizes to an external composite clock timing source

729GP Optical Network Terminal (ONT729GP)

Optical LAN
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Telecommunications room rack mounting to match traditional LAN footprint and reuse final 100m 300ft copper-cable access drops
  • Advanced IP and Ethernet Functions
  • Supports IP-based voice, all forms of enterprise IP-based data traffic and all forms of enterprise IP-based video traffic
  • Both IEEE 802.3af Power over Ethernet (PoE) and high-power PoE+ IEEE 802.3at
  • Enterprise grade G-PON ITU-T G.984 implementation
  • Flexible 24-ports for analog voice business service delivery via RJ-21 50-pin POTS connector
  • Supports Dante and CobraNet digital audio systems over IP

ADSL2+ 6+0B Plug-in Card with Bonding

T1000
  • Dual memory for minimal service-affecting upgrades
  • Compatible with both CPU-2 and CPU-3
  • High performance provides higher bit rate and broader reach
  • Low power/heat dissipation for increased capacity
  • Supports ADSL2 Reach Extended (RE) option for longer reach
  • Provides ADSL2 power saving states
  • Up to 48 VCCs per card
  • Six integrated ports of ADSL2+ (with bonding capability) and POTS
  • Up to 20 cards per Tellabs 1000 MSAP shelf
  • Unspecified Bit Rate (UBR), Constant Bit Rate (CBR) and Variable Bit Rate Real Time (VBRrt)
  • Receives and responds to F5 Operations and Maintenance (OAM) loopback cells

ADSL2+ 6+6B Plug-in Card

T1000
  • Integrated DSL+POTS (6+6) interface enables you to cost-effectively support a 100% take-rate of IPTV and High Speed Internet (HSI) services on day one.
  • The ADSL2+ 6+6B card provides bit rates up to 24 Mbps downstream and over 1.4 Mbps upstream on a single copper pair.
  • By bonding two adjacent ports, you can achieve 48 Mbps downstream and over 2.8 Mbps upstream.
  • Higher bit rates help you keep up with the growing broadband demands of IPTV, VoD, HSI and Over-the-Top services.

Advanced Operations Software Package

Optical LAN
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Global policies increase automation with more machine-to-machine actions and limiting human-to-machine actions
  • Reduce mission-critical yet repetitive operational tasks to effectively zero dollars
  • Providing quick views, fast isolation and easy drill-down uncovers root causes and speeds resolution

E&M Special Services (E&M) Plug-in Card

T1000
  • End-to-end compatibility with existing cards in the field
  • Two circuits per card, each able to support different provisioning
  • Software-provisionable E&M and PLR modes (2-wire or 4-wire)
  • Provides one or two E&M circuits per card, depending on modes: E&M Type I, II, III, IV, V and PLR I and II
  • Software-provisionable Tandem and DX modes (4-wire only)
  • Provisionable transmit and receive gain
  • Provisionable bias (switched or fixed — DX mode only)
  • Post-equalization
  • 600 ohms and 1200 ohms fixed impedances
  • Normal and reverse DX signaling

Expansion Bank Control (EBC-3)

T1000
  • Enables simple system expansion and control for expansion shelves
  • Supports transport of ATM, Ethernet and TDM traffic between shelves
  • Interfaces to an ELU-3 plug-in card in a primary shelf
  • Generates status updates to the CPU via the ELU plug-in card
  • CRC protection on the expansion link
  • Dual memory support for non-service affecting programming
  • Receives DDS timing from the primary shelf
  • Ability to derive timing reference from expansion shelf and transport it to primary shelf via the ELU plug-in card

Expansion Link Unit 3 (ELU-3)

T1000
  • Enables simple system expansion and control for expansion shelves
  • Supports transport of ATM, Ethernet and TDM traffic between shelves
  • Communications gateway between the CPU-3 and the expansion shelves
  • Dual memory support for non-service affecting programming
  • Ability to recover timing reference from the expansion shelf and provide it to the primary shelf
  • Provides composite clock P-Bits and N-Bits to the expansion shelf for DDS timing in the expansion shelf

FlexSym 205 Optical Network Terminal (ONT205)

Optical LAN
  • Four (4) 10/100/1000 and one (1) 10G interface with Power over Ethernet support for 4PPoE supporting 802.3af/at/bt
  • Overlay ITU 948 G-PON ONTs with ITU 989 XGS-PON 10G ONT on same fiber protecting existing infrastructure investments
  • Deliver 10G capacity only where necessary to optimize space, energy and monetary issues associated with 10G
  • ONT205 supports 1G, 2.5G, 5G and 10G as needed properly aligning network design with true traffic requirements
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Management can be server, laptop, tablet, cloud-based and lays the foundation for future software defined networking automation.
  • Supports Dante and CobraNet digital audio systems over IP
  • Bi-directional AES-128 encryption with 60 second churning of keys

FlexSym Optical Interface Unit Eight (OIU8)

Optical LAN
  • 8-port PON service module with XFP selectable ITU 984 G-PON 2.5G or ITU 989 XGS-PON symmetrical 10G connectivity
  • Open-source and standards-based Software Defined Networking (SDN) ready, plus NG-PON2 capable with future software
  • XGS-PON bi-directional AES128 Encryption with churning key with Tellabs FlexSym ONT205
  • Compatible with QOIU7 for cost-effective and graceful migration from G-PON 2.5G to XGS-PON 10G and then NG-PON2 40G
  • Environmentally-hardened for remote deployments in areas with no air conditioning nor heating
  • Enterprise data including wireless access, access control, security, surveillance, building environment and automation

FlexSym Singlemode to Multimode 2×32 Splitter

Optical LAN
  • Allows re-use of multimode fiber cabling from the splitter location to where the ONTs are mounted
  • Available in both 2:8 and 2:32 splitter versions
  • Optional support for Type-B PON redundancy adding additional resiliency to the network design
  • Eliminates the cost of installing new singlemode fiber in the horizontal pathways and the final access drops
  • Allows full rate G-PON service over MM fibers up to 600 meters
  • Supports any length of singlemode fiber from the Tellabs OLT to the splitter up to the limit of the 28dB optical budget
  • Supports OM1, OM2, OM3, and OM4 multimode fiber cabling
  • Completely passive operation with no power or maintenance required

FlexSym Singlemode to Multimode 2×8 Splitter

Optical LAN
  • Allows re-use of multimode fiber cabling from the splitter location to where the ONTs are mounted
  • Available in both 2:8 and 2:32 splitter versions
  • Optional support for Type-B PON redundancy adding additional resiliency to the network design
  • Eliminates the cost of installing new singlemode fiber in the horizontal pathways and the final access drops
  • Allows full rate G-PON service over MM fibers up to 600 meters
  • Supports any length of singlemode fiber from the Tellabs OLT to the splitter up to the limit of the 28dB optical budget
  • Supports OM1, OM2, OM3, and OM4 multimode fiber cabling
  • Completely passive operation with no power or maintenance required

Gigabit Ethernet Transceiver 222 (GbE222)

T1000
  • Traffic management on a per flow basis
  • Dynamic MAC learning with support for up to 8,000 MAC addresses
  • 4096 VLANs (802.1q) and stacked VLAN support (IEEE 802.1ad)
  • Retain, add, modify and remove subscriber VLAN (C-Tag) and network VLAN (S-Tag)
  • Queuing priority (IEEE 802.1p) and mapping to Asynchronous Transfer Mode (ATM) Quality of Service (QoS) traffic profiles
  • Data services such as Transparent LAN Service (TLS)
  • Multicast support with IGMP Snooping and Proxy for IGMPv2 and IGMPv3
  • Dual memory for minimal service interruption during programming/software upgrades

OC12c Transceiver (OC12c-XCVR)

T1000
  • Provides a full 622 Mbps physical interface on 1310 nm single-mode fiber for its OC12c interface using two fibers - one transmit and one receive
  • Functions as an uplink to an ATM network or an inter-terminal transport.
  • SONET Automatic Protection Switching (APS) 1+1 enabled when provisioned as an uplink
  • GR-253 Intermediate Reach compatible (GR-253-CORE)
  • Supports 2048 virtual channel connections
  • Dual-memory for non-service affecting programming
  • SC Connectors for easy installation

OC3c Transceiver (OC3c-XCVR)

T1000
  • Provides a full 155 Mbps physical interface on 1310 nm single-mode fiber for its OC3c interface using two fibers - one transmit and one receive
  • Functions as a concentrator, an uplink to an ATM network, an inter-terminal transport or an ATM service card
  • SONET Automatic Protection Switching (APS) 1+1 enabled when provisioned as an uplink
  • GR-253 Intermediate Reach compatible (GR-253-CORE)
  • Supports 2048 virtual channel connections
  • Dual-memory for non-service affecting programming
  • Functions as a concentrator, an uplink to an ATM network, an inter-terminal transport or an ATM service card
  • SC Connectors for easy installation

Small 1048 Channel Bank Assembly (CBA)

T1000
  • Supports traditional narrowband and modern broadband services
  • Equip with TDM, SONET or Ethernet plug-in cards
  • Capable of 100% xDSL fill rate
  • -48v power rail to all slots
  • Rapid deployment from any existing cabinet
  • Full NMS control integrates existing access networks
  • Alarm contact closure wire-wrap posts
  • Wire-wrap backplane only for complete flexibility on a slot per slot basis
  • On-board craft port with A/B switch for modem interface
  • Variable speed fan tray assembly

T1 HDSL 2-Wire Transceiver (T1HD2-XCVR)

T1000
  • Operates as H2TU-C or H2TU-R
  • Dual flash memory banks for upgrade support
  • Front panel jack access for test and monitoring
  • Intact asynchronous T1 delivery capability
  • Synchronous T1 delivery capability
  • AMI/ZCS and B8ZS line coding
  • SF, ESF, Unframed, and Auto framing formats
  • Supports HDSL2 functionality defined in ANSI T1.418, Issue 2
  • Functions as an inter-terminal transport or service card
  • One HDSL2 T1 (1.544-Mbps) interface per card
  • Line-powering capability
  • Supports one ADTRAN range extender
  • Extensive loopback diagnostics and performance monitoring capabilities

T1 HDSL 4-Wire Transceiver (T1HD4-XCVR)

T1000
  • Operates as H4TU-C or H4TU-R
  • Dual memory support for upgrades
  • Interoperable with the T1X-XCVR card when an H4TU-C or H4TU-R is used
  • Compatible with other standards-based HDSL4 products
  • Line-powering capability
  • Up to 45 kft repeatered T1 transmission on #24 AWG copper facilities
  • Up to 32 kft repeatered T1 transmission on #26 AWG copper facilities
  • Capacity for to power two line powered ADTRAN range extenders
  • Support Inverse Multiplexing over ATM with Tellabs 1000 MSAP IMA card
  • Intact asynchronous T1 delivery capability
  • Synchronous T1 delivery capability
  • AMI/ZCS and B8ZS line coding
  • SF, ESF, Unframed, and Auto framing formats
  • Functions as an inter-terminal transport or service card
  • Supports HDSL4 functionality defined in ANSI T1.418, Issue 2
  • One HDSL4 T1 (1.544-Mbps) interface per card

VDSL2 6+6 Plug-in Card

T1000
  • Both VDSL2 and ADSL2+ bonding for twice the bandwidth across two pairs
  • Supports PTM and ATM traffic options per port for packet or ATM transmission
  • ADSL2+ fallback from VDSL2 and from PTM to ATM for best reach and rate
  • 17a profile for 5-band (17 Mhz) support, maximizing bandwidth within short CSAs
  • Single Ended Line Test (SELT) proactively qualifies line distance, gauge and noise
  • Low-power mode transition, at port level, saves power during port inactivity
  • Power shut-off feature, at port level, saves power during battery backup conditions
  • Power shut-off feature, at port level, saves power during battery backup conditions
Email Us
To place an order or reach customer service, email directly at
Enterprise
Tellabs-Enterprise-OM@tellabs.com
Broadband
Tellabs-Broadband-OM@tellabs.com
Technical Support
technical.services@tellabs.com
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
+1 972 588 7000
Technical Assistance Center (TAC)
+1 800 690 2324