Tellabs Products
From entertainment and telecom in the home to patient information in healthcare, from financial data to homeland security; fast and secure access has never been in more demand. Tellabs' sole focus is to deliver secure, scalable, sustainable access to optimize network performance.

Tellabs Network Solutions Suite

Tellabs Optical LAN delivers a network that is faster, more efficient, sustainable, cost effective, scalable and adaptable to future requirements than traditional copper-based infrastructure. Optical LANs eliminate the distance constraints, power requirements and heat dispersion issues of copper. They deliver increased network security, performance and operational efficiency. There is no doubt: Optical LAN is the future of enterprise access networks.
Tellabs Broadband provides an end-to-end cost-effective access solution that passes more than 5 million homes in North America. Our Multi-Service Access Platform (MSAP) enable you to get the most from your existing infrastructure. You'll save costs by reducing power consumption while gaining revenue opportunities by delivering services faster. Tellabs T1000 - the industry’s only Broadband Digital Loop Carrier platform that converges legacy copper and modern fiber connectivity.
(16 Matches)

10 Gigabit Ethernet 226 (GbE226) – Limited Availability

T1000
  • Two 1G/10G Ethernet ports enhanced small form-factor pluggable (SFP+)
  • Four 1G Ethernet ports small form-factor pluggable (SFP)
  • Port filtering
  • Flexible configuration of 10G uplinks and 1G aggregation ports
  • QoS via IEEE 802.1P priority bits
  • IPv4 and IPv6 transparency
  • Six-Port Ethernet switch/hub with flexible uplink and tributary functionality
  • Flow control
  • Configurable Layer-2 learning
  • Spanning Tree forwarding
  • 1526 Byte Maximum Transmission Unit (MTU)
  • Standard SNMP based Ethernet statistics
  • Hardware support for future Synchronous Ethernet (SyncE) and IEEE 1588 Precision Time Protocol (PTP) timing
  • 6-Port Managed Layer 2-switch with VLAN awareness
  • SNMP based Ethernet statistics

1RU Fan Tray Unit

T1000
  • Temperature control and fan speed control
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • A test switch on the fan tray front panel allows the fans to be manually tested for correct functioning.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • In the event of fan tray failure, the fan tray alarm relays communicate with the appropriate alarm monitoring interface.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans

52EU 1000-Line Remote Outdoor Cabinet

T1000
  • In controlled environments, if the composite clock signal degrades, ETI provides Stratum 3E holdover using historical timing data
  • Provisionable Stratum levels: 3, 3 with 3E holdover, 4, and SONET
  • LET or RST operation (primary shelf)
  • Up to Stratum 3/3E free-run accuracy
  • Jitter and wander reduction of external timing source
  • A second ETI can be installed for standby operation
  • Telcordia compliant design cabinet is expandable from four shelves to eight
  • Fiber splice and distribution options
  • -48 VDC powered cooling fans
  • Separate vented battery compartment and battery back-up options
  • Standard surge protection
  • Copper line protection in separate compartment (non-cross-connect configurations)
  • Hex key lock (padlockable for additional security)
  • Synchronizes to an external composite clock timing source

Expansion Bank Control (EBC-3)

T1000
  • Enables simple system expansion and control for expansion shelves
  • Supports transport of ATM, Ethernet and TDM traffic between shelves
  • Interfaces to an ELU-3 plug-in card in a primary shelf
  • Generates status updates to the CPU via the ELU plug-in card
  • CRC protection on the expansion link
  • Dual memory support for non-service affecting programming
  • Receives DDS timing from the primary shelf
  • Ability to derive timing reference from expansion shelf and transport it to primary shelf via the ELU plug-in card

Expansion Link Unit 3 (ELU-3)

T1000
  • Enables simple system expansion and control for expansion shelves
  • Supports transport of ATM, Ethernet and TDM traffic between shelves
  • Communications gateway between the CPU-3 and the expansion shelves
  • Dual memory support for non-service affecting programming
  • Ability to recover timing reference from the expansion shelf and provide it to the primary shelf
  • Provides composite clock P-Bits and N-Bits to the expansion shelf for DDS timing in the expansion shelf

Gigabit Ethernet Transceiver 222 (GbE222)

T1000
  • Traffic management on a per flow basis
  • Dynamic MAC learning with support for up to 8,000 MAC addresses
  • 4096 VLANs (802.1q) and stacked VLAN support (IEEE 802.1ad)
  • Retain, add, modify and remove subscriber VLAN (C-Tag) and network VLAN (S-Tag)
  • Queuing priority (IEEE 802.1p) and mapping to Asynchronous Transfer Mode (ATM) Quality of Service (QoS) traffic profiles
  • Data services such as Transparent LAN Service (TLS)
  • Multicast support with IGMP Snooping and Proxy for IGMPv2 and IGMPv3
  • Dual memory for minimal service interruption during programming/software upgrades
Email Us
To place an order or reach customer service, email directly at
Technical Support
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
Technical Assistance Center (TAC)