Tellabs® 8800 Card Insertion Procedures
TLC Keyword: 88CIP
Orderable part #: GSSTW88CIP
This web-based course uses video to demonstrate the procedures to install a Switch and Control Card, a 10G Line Card, a Universal Line Card, and a Physical Line Module in a Tellabs 8800 system.
It is free to view this video. Video content in the course requires headphones and sound capabilities.
Upon completion of this course, participants should be able to:
- Insert and retrieve cards using procedures to ensure ESD protection 100% of the time
- Insert a card in a timely manner as to not disrupt EMI protection and airflow interference in the 8800 series chassis
- Insert a Switch and Control Card (SCC), 10G Line Card, and Universal Line Card (ULC) into the 8800 series chassis using the card guides without damage to the card or chassis
- Insert a Physical Line Modules (PLM) into the ULC using the card guides without damage to the card or chassis
- Seat the SCC, 10G Line Card, and ULC into the 8800 series chassis using the appropriate ejector handle technique without damage to the card or chassis
- Seat the PLM into the ULC using the appropriate ejector handle technique without damage to either card
- Apply the appropriate torque to fasten the card to the chassis without damage to the screws or chassis
| Prerequisites: | In order to successfully complete this web-based course, it is strongly recommended that participants have a basic knowledge of the Tellabs 8800 system architecture. |
| Audience: | This course is designed for any personnel who are, or will be, responsible for operating, provisioning, or maintaining Tellabs 8800 series systems. |
Course Outline
- Switch and Control Card (SCC) Installation
- 10G Line Card Installation
- Universal Line Card (ULC) Installation
- Physical Line Modules (PLM) Installation
- Card Insertion Process Review
The following topics are discussed in each of the lessons above:
- ESD Grounding
- Removing blanking panels
- Inserting the card into the chassis
- Seating the card with the ejector handles
- Fastening the ejector screws
It is FREE to view this video! Use the following link to launch the course: (You do NOT need to register for this video in Tellabs Learning Connections.)
http://www.tellabs.com/training/gsstw88cip/
Class Specifics
Duration: Self-paced; average time to complete: 0.5 hour
Requirements: Computer with Internet access. Before you begin this course, please make sure your computer hardware and software are compatible by reviewing the recommended general system requirements in the Policy and Procedures section.
Enroll
To register for a class, Tellabs customers and sales partners can log in to Tellabs Learning Connections, when prompted, please enter your Tellabs Portal username and password. From the Training tab, click the Access TLC Now button.
For inquiries regarding a course not listed in our catalog, please contact your regional training center.
