Featured Post
Just 1-2-3 steps to install our Tellabs ONT140W makes it as easy to learn as your ABCs
Featured Post
Top 5 blogs help accelerate awareness and engagements by a factor of 5!

ADSL2+ 6+0B Plug-in Card with Bonding

T1000
  • Dual memory for minimal service-affecting upgrades
  • Compatible with both CPU-2 and CPU-3
  • High performance provides higher bit rate and broader reach
  • Six integrated ports of ADSL2+ (with bonding capability) and POTS
  • Up to 20 cards per Tellabs 1000 MSAP shelf
  • Low power/heat dissipation for increased capacity
  • Supports ADSL2 Reach Extended (RE) option for longer reach
  • Provides ADSL2 power saving states
  • Up to 48 VCCs per card
  • Unspecified Bit Rate (UBR), Constant Bit Rate (CBR) and Variable Bit Rate Real Time (VBRrt)
  • Receives and responds to F5 Operations and Maintenance (OAM) loopback cells

E&M Special Services (E&M) Plug-in Card

T1000
  • End-to-end compatibility with existing cards in the field
  • Two circuits per card, each able to support different provisioning
  • Software-provisionable E&M and PLR modes (2-wire or 4-wire)
  • Provides one or two E&M circuits per card, depending on modes: E&M Type I, II, III, IV, V and PLR I and II
  • Software-provisionable Tandem and DX modes (4-wire only)
  • Provisionable transmit and receive gain
  • Provisionable bias (switched or fixed — DX mode only)
  • Post-equalization
  • 600 ohms and 1200 ohms fixed impedances
  • Normal and reverse DX signaling

Remote Broadband Cabinet 52EU (RBC52EU) 1000-Line

T1000
  • In controlled environments, if the composite clock signal degrades, ETI provides Stratum 3E holdover using historical timing data
  • Provisionable Stratum levels: 3, 3 with 3E holdover, 4, and SONET
  • LET or RST operation (primary shelf)
  • Up to Stratum 3/3E free-run accuracy
  • Jitter and wander reduction of external timing source
  • A second ETI can be installed for standby operation
  • Telcordia compliant design cabinet is expandable from four shelves to eight
  • Fiber splice and distribution options
  • -48 VDC powered cooling fans
  • Separate vented battery compartment and battery back-up options
  • Standard surge protection
  • Copper line protection in separate compartment (non-cross-connect configurations)
  • Hex key lock (padlockable for additional security)
  • Synchronizes to an external composite clock timing source

Gigabit Ethernet Transceiver 222 (GbE222)

T1000
  • Traffic management on a per flow basis
  • Dynamic MAC learning with support for up to 8,000 MAC addresses
  • 4096 VLANs (802.1q) and stacked VLAN support (IEEE 802.1ad)
  • Data services such as Transparent LAN Service (TLS)
  • Retain, add, modify and remove subscriber VLAN (C-Tag) and network VLAN (S-Tag)
  • Queuing priority (IEEE 802.1p) and mapping to Asynchronous Transfer Mode (ATM) Quality of Service (QoS) traffic profiles
  • Multicast support with IGMP Snooping and Proxy for IGMPv2 and IGMPv3
  • Dual memory for minimal service interruption during programming/software upgrades

OC12c Transceiver (OC12c-XCVR)

T1000
  • Provides a full 622 Mbps physical interface on 1310 nm single-mode fiber for its OC12c interface using two fibers - one transmit and one receive
  • Functions as an uplink to an ATM network or an inter-terminal transport.
  • SONET Automatic Protection Switching (APS) 1+1 enabled when provisioned as an uplink
  • GR-253 Intermediate Reach compatible (GR-253-CORE)
  • Supports 2048 virtual channel connections
  • Dual-memory for non-service affecting programming
  • SC Connectors for easy installation
Email Us
To place an order or reach customer service, email directly at
Technical Support
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
Technical Assistance Center (TAC)