FlexSym Optical Network Terminal 202 (ONT202)

SKU: 81.11G-ONT202 Category:

The Tellabs FlexSym® Optical Network Terminal 202 (ONT202) offers two multi-rate
Ethernet options for 1G, 2.5G, 5G and 10G speed connectivity over a 10-gigabit
symmetrical passive optical network (ITU G.9807.1 XGS-PON).

Additional information

Dimensions 8 × 9 × 2 cm
Solution

Enterprise

Material Status

Pilot

  • Plenum rated with metal enclosure, integrated fiber management and multiple mounting options
  • Two multi-rate Ethernet ports supporting 10G/5G/2.5G/1G and the other supporting 2.5G/1G/100M
  • Power over Ethernet (PoE) 802.3af, 802.3at, 802.3bt (4PPoE), and UPoE with 60W per port capacity
  • Local and remote powering choices are supported with both Phoenix and Molex connectors
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Industrial temperature and power supply for use in outdoor rated NEMA enclosures

Connecting Wi-Fi Access Points

The Tellabs FlexSym ONT202 provides flexible choices for connecting modern wireless access points, including IEEE 802.1ax Wi-Fi 6 and future wireless technologies, over a fiber-based enterprise network. In a traditional network design, these bandwidth hungry Wi-Fi devices demand multiple point-to-point gigabit Ethernet connections 100m (300ft) back to the telecommunications rooms. With the Tellabs FlexSym ONT202, the unlimited capacity of fiber cabling can be pushed deep into buildings and across extended campus, with multi-rate Ethernet for 1G, 2.5G, 5G and 10G positioned near the Wi-Fi endpoints provide the optimal bandwidth needed.


IP Camera Backhaul

Additionally, Tellabs FlexSym ONT202 industrial temperature range and high-power Power over Ethernet (PoE) capacity makes it well suited for outdoor IP surveillance camera support where higher resolutions cameras such as HD and 4K monopolize bandwidth. The ONT202’s high power PoE is also important to support the camera heaters and Pan Tilt Zoom (PTZ).


Centralized Management

All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being controlled by the Tellabs® Panorama™ PON Manager helps speed installations and daily operations. Centrally controlled by the Tellabs Panorama PON Manager, the Tellabs FlexSym ONT202 supports auto-discovery mechanisms, can be quickly provisioned using global profiles, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes for everyday operations.


Power over Ethernet (PoE)

The ONT202 supports Power over Ethernet (PoE) standards IEEE 802.3af, 802.3at, 802.3bt (4PPoE), and Cisco UPoE. It can deliver up to 120W (2x60W) of PoE power when powered by the 150W AC wall adapter utilizing the Molex 8 pin connector and up to 60W of PoE power when powered by the 75W AC wall adapter. The ONT202 supports up to 90W of PoE power when powered by remote power.


Powering Options

The Tellabs FlexSym ONT202 powering options include both local AC and remote DC. For local AC power, power adaptors are used to transform 120 AC power from the wall plug to 48 DC power delivered to the ONT. For the remote DC power option, a centrally located bulk rectifier can be used, and 48 VDC power is delivered over CATx cables or new hybrid fiber/copper cables. Remote powering option uses a centrally located bulk power plant, emergency power and bulk battery back-up.


Mounting Choices

The ONT202 supports industrial temperature making it an ideal choice for outdoor mounting in NEMA enclosures for connecting outdoor Wi-Fi and IP surveillance cameras. It is also plenum rated with a metal enclosure and integrated fiber management. It has pre-existing mounting holes for easy mounting on double gang electrical box, Tellabs ONT140C mounting plate and options for DIN rail rack mounting.

Physical

  • Weight: .77 lbs / 12.34 oz
  • Depth: 5.14 in / 130 mm
  • Width: 6.92 in / 176 mm
  • Height: 1.45 in / 36.8 mm


Interfaces

  • One (1) 10G/5G/2.5G/1G multi-rate port, RJ-45
  • One (1) 2.5G/1G/100M multi-rate port, RJ-45
  • SC/APC symmetrical ITU-T G.9807.1 PON


Power

  • Input at ONT (volts): 52-57Vdc
  • Consumption (watts): 6.8 W
  • Remote Power Connector: Phoenix (supports 12-26 AWG wire)
  • Max PoE Power via local AC power: 120W
  • Max PoE Power via remote power: 90W
  • AC Adapter Input: 2.0A@100-240VAC, 50-60Hz
  • AC Adapter Output: 54V@2.78A (120W)
  • Local Power Supply Unit (PSU): not included
  • Local PSU: 81.11P-PWIL150W
  • Local ONT Power Connector (PSU connector): Molex
  • Remote Power Connector: Phoenix (supports 12-26 AWG wire)
  • Dying Gasp support


Passive Optical Network

  • ITU-T G.984.2 Amd1 Class B+
  • APD receiver and DFB transmitter
  • 4-9dBm launch power, -28 dBm sensitivity and -9 dBm overload
  • Bi-directional AES-128 encryption with 60 second churning of keys
  • Forward Error Correction (FEC)
  • IP DSCP to 802.1p mapping
  • Support for multicast GEM port
  • Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
  • SFF-type laser SC/APC connector
  • Wavelengths: Downstream 1580 nm, Upstream 1280 nm
  • 9.95328 Gbps burst mode upstream
  • 9.95328 Gbps downstream receive
  • Laser compliant FCC 47 CFR Part 15
  • Class B and FDA 21 CFR 1040.10 and 1040.11, Class 
  • Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
  • Activation with automatically discovered Serial Number (SN) and password


IP/Ethernet

  • MAC address limiting to prevent flooding attacks and limiting the number of devices attached to a port
  • IGMP v2/v3 snooping
  • IEEE 802.1x Port-Based Authentication/MAB
  • Link Layer Data Protocol (LLDP) for autoprovisioning, inventory and PoE power management.
  • PoE: Cisco UPoE Support with up to 60W per port on all ports
  • PoE: 802.3bt 4PPoE class 5-6, up to 60W per port on all ports.
  • L2-L4 Access Control Lists (ACLs)
  • Upstream ACL rate limiting
  • Supports Dante and CobraNet digital audio systems over IP
  • Virtual switch based on 802.1Q VLAN
  • 1024 MAC addresses
  • 25 VLANs per Ethernet port
  • VLAN tagging/detagging, marking/remarking per Ethernet port
  • VLAN trunking and stacking
  • IPv6 capable for enterprise services
  • PoE: 802.3af/at, class 0-4, up to 30W per port on all ports
  • Network Access Control (NAC)
  • QoS and security policies based on VLAN-ID, 802.1p, DSCP


Operations, Administration and Maintenance (OAM)

  • Complete service provisioning, such as Ethernet and VoIP
  • Holds two versions of software with image integrity checking and automatic rollback
  • Standards-compliant OMCI as defined in ITU-T G.988
  • Alarming, events and performance monitoring
  • Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get & Get Next commands
  • Remote image download over OMCI as well as activation and rebooting


Environmentals

  • Temperature: -40° C to 60° C
  • Relative humidity: 10% to 95%, noncondensing


Compliance

  • CE
  • FCC
  • UL
  • UL2043 plenum fire test
  • RoHS


LED Indicators

  • MG1 – Multi-rate port 1, 10G
  • MG2 – Multi-rate port 2, 2.5G
  • Power
  • PON


Management

  • ONT has no local management access
  • Tellabs Panorama PON Manager


Software Support

  • Minimum base software SR32.0 and higher [Limited Availability]
  • Holds two versions of software with image integrity checking and automatic rollback


Installations

  • ONT mounts on a desktop, under a desk, on a wall, vertical, horizontal or free-standing
  • Plenum rated for above ceilings
  • Industrial temperature for mounting in outdoor rated NEMA enclosures
  • DIN rail mounting option
  • OLTs supported: OLT1150, OLT1150E, OLT1134AC, OLT1131, OLT6, OLT1, OLT-mini
  • Built-in location indicator for easy installation and labeling identification
  • BRACKET ONT202 10 PACK: 81.11K-BKONTBBU-R6


Ordering Information

  • FlexSym ONT202: 81.11G-ONT202  
  • PWR IN LINE ADPT 54V, 2.8A NO CORD (C13): 81.11P-PWIL150W
  • PWR AC CORD C13 TO TYPE B US 3FT: 81.11W-C13TYPB-3
  • BRACKET ONT140C, ONT202 10 PACK: 81.11K-BKONTBBU-R6


General

The development, release, and timing of features or functionality described for Tellabs products remains at Tellabs sole discretion. The information that is provided within this data sheet is not a commitment nor legal obligation to deliver any material, code or functionality.

FlexSym Optical Network Terminal 202 (ONT202)

SKU: 81.11G-ONT202 Category:

The Tellabs FlexSym® Optical Network Terminal 202 (ONT202) offers two multi-rate
Ethernet options for 1G, 2.5G, 5G and 10G speed connectivity over a 10-gigabit
symmetrical passive optical network (ITU G.9807.1 XGS-PON).

FlexSym Optical Network Terminal 202 (ONT202)

Features

  • Plenum rated with metal enclosure, integrated fiber management and multiple mounting options
  • Two multi-rate Ethernet ports supporting 10G/5G/2.5G/1G and the other supporting 2.5G/1G/100M
  • Power over Ethernet (PoE) 802.3af, 802.3at, 802.3bt (4PPoE), and UPoE with 60W per port capacity
  • Local and remote powering choices are supported with both Phoenix and Molex connectors
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Industrial temperature and power supply for use in outdoor rated NEMA enclosures

Highlights

Connecting Wi-Fi Access Points

The Tellabs FlexSym ONT202 provides flexible choices for connecting modern wireless access points, including IEEE 802.1ax Wi-Fi 6 and future wireless technologies, over a fiber-based enterprise network. In a traditional network design, these bandwidth hungry Wi-Fi devices demand multiple point-to-point gigabit Ethernet connections 100m (300ft) back to the telecommunications rooms. With the Tellabs FlexSym ONT202, the unlimited capacity of fiber cabling can be pushed deep into buildings and across extended campus, with multi-rate Ethernet for 1G, 2.5G, 5G and 10G positioned near the Wi-Fi endpoints provide the optimal bandwidth needed.


IP Camera Backhaul

Additionally, Tellabs FlexSym ONT202 industrial temperature range and high-power Power over Ethernet (PoE) capacity makes it well suited for outdoor IP surveillance camera support where higher resolutions cameras such as HD and 4K monopolize bandwidth. The ONT202’s high power PoE is also important to support the camera heaters and Pan Tilt Zoom (PTZ).


Centralized Management

All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being controlled by the Tellabs® Panorama™ PON Manager helps speed installations and daily operations. Centrally controlled by the Tellabs Panorama PON Manager, the Tellabs FlexSym ONT202 supports auto-discovery mechanisms, can be quickly provisioned using global profiles, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes for everyday operations.


Power over Ethernet (PoE)

The ONT202 supports Power over Ethernet (PoE) standards IEEE 802.3af, 802.3at, 802.3bt (4PPoE), and Cisco UPoE. It can deliver up to 120W (2x60W) of PoE power when powered by the 150W AC wall adapter utilizing the Molex 8 pin connector and up to 60W of PoE power when powered by the 75W AC wall adapter. The ONT202 supports up to 90W of PoE power when powered by remote power.


Powering Options

The Tellabs FlexSym ONT202 powering options include both local AC and remote DC. For local AC power, power adaptors are used to transform 120 AC power from the wall plug to 48 DC power delivered to the ONT. For the remote DC power option, a centrally located bulk rectifier can be used, and 48 VDC power is delivered over CATx cables or new hybrid fiber/copper cables. Remote powering option uses a centrally located bulk power plant, emergency power and bulk battery back-up.


Mounting Choices

The ONT202 supports industrial temperature making it an ideal choice for outdoor mounting in NEMA enclosures for connecting outdoor Wi-Fi and IP surveillance cameras. It is also plenum rated with a metal enclosure and integrated fiber management. It has pre-existing mounting holes for easy mounting on double gang electrical box, Tellabs ONT140C mounting plate and options for DIN rail rack mounting.

Specifications

Physical

  • Weight: .77 lbs / 12.34 oz
  • Depth: 5.14 in / 130 mm
  • Width: 6.92 in / 176 mm
  • Height: 1.45 in / 36.8 mm


Interfaces

  • One (1) 10G/5G/2.5G/1G multi-rate port, RJ-45
  • One (1) 2.5G/1G/100M multi-rate port, RJ-45
  • SC/APC symmetrical ITU-T G.9807.1 PON


Power

  • Input at ONT (volts): 52-57Vdc
  • Consumption (watts): 6.8 W
  • Remote Power Connector: Phoenix (supports 12-26 AWG wire)
  • Max PoE Power via local AC power: 120W
  • Max PoE Power via remote power: 90W
  • AC Adapter Input: 2.0A@100-240VAC, 50-60Hz
  • AC Adapter Output: 54V@2.78A (120W)
  • Local Power Supply Unit (PSU): not included
  • Local PSU: 81.11P-PWIL150W
  • Local ONT Power Connector (PSU connector): Molex
  • Remote Power Connector: Phoenix (supports 12-26 AWG wire)
  • Dying Gasp support


Passive Optical Network

  • ITU-T G.984.2 Amd1 Class B+
  • APD receiver and DFB transmitter
  • 4-9dBm launch power, -28 dBm sensitivity and -9 dBm overload
  • Bi-directional AES-128 encryption with 60 second churning of keys
  • Forward Error Correction (FEC)
  • IP DSCP to 802.1p mapping
  • Support for multicast GEM port
  • Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
  • SFF-type laser SC/APC connector
  • Wavelengths: Downstream 1580 nm, Upstream 1280 nm
  • 9.95328 Gbps burst mode upstream
  • 9.95328 Gbps downstream receive
  • Laser compliant FCC 47 CFR Part 15
  • Class B and FDA 21 CFR 1040.10 and 1040.11, Class 
  • Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
  • Activation with automatically discovered Serial Number (SN) and password


IP/Ethernet

  • MAC address limiting to prevent flooding attacks and limiting the number of devices attached to a port
  • IGMP v2/v3 snooping
  • IEEE 802.1x Port-Based Authentication/MAB
  • Link Layer Data Protocol (LLDP) for autoprovisioning, inventory and PoE power management.
  • PoE: Cisco UPoE Support with up to 60W per port on all ports
  • PoE: 802.3bt 4PPoE class 5-6, up to 60W per port on all ports.
  • L2-L4 Access Control Lists (ACLs)
  • Upstream ACL rate limiting
  • Supports Dante and CobraNet digital audio systems over IP
  • Virtual switch based on 802.1Q VLAN
  • 1024 MAC addresses
  • 25 VLANs per Ethernet port
  • VLAN tagging/detagging, marking/remarking per Ethernet port
  • VLAN trunking and stacking
  • IPv6 capable for enterprise services
  • PoE: 802.3af/at, class 0-4, up to 30W per port on all ports
  • Network Access Control (NAC)
  • QoS and security policies based on VLAN-ID, 802.1p, DSCP


Operations, Administration and Maintenance (OAM)

  • Complete service provisioning, such as Ethernet and VoIP
  • Holds two versions of software with image integrity checking and automatic rollback
  • Standards-compliant OMCI as defined in ITU-T G.988
  • Alarming, events and performance monitoring
  • Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get & Get Next commands
  • Remote image download over OMCI as well as activation and rebooting


Environmentals

  • Temperature: -40° C to 60° C
  • Relative humidity: 10% to 95%, noncondensing


Compliance

  • CE
  • FCC
  • UL
  • UL2043 plenum fire test
  • RoHS


LED Indicators

  • MG1 – Multi-rate port 1, 10G
  • MG2 – Multi-rate port 2, 2.5G
  • Power
  • PON


Management

  • ONT has no local management access
  • Tellabs Panorama PON Manager


Software Support

  • Minimum base software SR32.0 and higher [Limited Availability]
  • Holds two versions of software with image integrity checking and automatic rollback


Installations

  • ONT mounts on a desktop, under a desk, on a wall, vertical, horizontal or free-standing
  • Plenum rated for above ceilings
  • Industrial temperature for mounting in outdoor rated NEMA enclosures
  • DIN rail mounting option
  • OLTs supported: OLT1150, OLT1150E, OLT1134AC, OLT1131, OLT6, OLT1, OLT-mini
  • Built-in location indicator for easy installation and labeling identification
  • BRACKET ONT202 10 PACK: 81.11K-BKONTBBU-R6


Ordering Information

  • FlexSym ONT202: 81.11G-ONT202  
  • PWR IN LINE ADPT 54V, 2.8A NO CORD (C13): 81.11P-PWIL150W
  • PWR AC CORD C13 TO TYPE B US 3FT: 81.11W-C13TYPB-3
  • BRACKET ONT140C, ONT202 10 PACK: 81.11K-BKONTBBU-R6


General

The development, release, and timing of features or functionality described for Tellabs products remains at Tellabs sole discretion. The information that is provided within this data sheet is not a commitment nor legal obligation to deliver any material, code or functionality.

News Releases

Corporate news releases recognizing significant achievements of Tellabs operations, products, solutions and customers.

Case Studies

Hear directly from our customers about their successful installations, quantifiable benefits and sincere testimonials.

Events

Up-coming conferences, seminars and webinars where Tellabs products, solutions and people will be actively participating.

Blogs & Articles

Read these short, and regularly updated, opinion pieces covering contemporary industry and technology topics.

White Papers

Download our non-vendor specific overviews meant to help readers understand an issue, solve a problem, or make a decision.

Videos

Media to educate and advocate our products, technologies or services, and offer direct insight into our customer references and user case studies.

Enterprise

Tellabs Optical LAN is a true enterprise centric solution that offers a better means of designing and operating networks inside buildings and across extended campuses.

Broadband

Tellabs 1000 MSAP (aka T1000, DMAX, AFC, UMC) is the industry’s only Broadband Digital Loop Carrier platform that converges legacy copper and modern fiber connectivity.

Technical Assistance Center

Address your questions and challenges quickly with our award winning TAC. Flexible support options to meet your needs.

Professional Services

From small projects to migrations to full turn key services, Tellabs is here to help.

Training

Preparation is the key to success.  Get your team ready to plan, deploy and manage your Tellabs Network. Check our our Training Curriculum today!

Credentials

You worked hard in Training, now it's time to show your new credentials off to the World through our Digital Credentialing Program!

Become a Partner

The Tellabs Advantage Partner Program is designed to offer our partners exceptional opportunities to grow your business, increase revenue and gain unique solution differentiation.

Find a Partner

For our end-customers, our Tellabs Advantage Partner Program offer best-in-breed services that match specific vertical markets and geographical regions with the end-customers exact needs in mind.

Leadership

Meet the Tellabs leadership team that represents diverse areas of expertise, and who are committed to exceeding the expectations of our employees, partners and customers.

Careers

Visit Tellabs’ online careers pages to see if there is a job opportunity that matches your ambitions. We offer excellent pay, benefits and career advancement possibilities.

Contact

Tellabs offer several easy options for contacting us. You can connect with us today via phone, email, online forms, or through social media channels.