RST Universal Voice Grade (R-UVG)

SKU: 0110-0222 Category:

Remote Subscriber Terminal (RST) Universal Voice Grade (R-UVG) plug-in card provides six individually provisionable ground start or loop start circuits and supports reverse battery signaling for applications such as PBX off-premises lines. The R-UVG is the constant current loop feed counterpart to the L-UVG card, which installs in the Local Exchange
Terminal (LET). The R-UVG is direct-mapped (non-concentrated) to the corresponding L-UVG card and establishes six dedicated circuits.

  • Automatic or provisionable transmission gain (0.1 dB steps)
  • Ground Start and Loop start and Reverse battery signaling
  • Forward disconnect
  • Firebar continuous ringing
  • Private Line Automatic Ringdown (PLAR) hotline service
  • On-hook transmission
  • Remote test access to metallic tip and ring
  • Call Message Waiting Indicator (CMWI)

Easy Provisioning

From CUI or Tellabs Panorama EMS the R-UVG can also be provisioned to support œfirebar� (continuous) ringing, full time on-hook transmission and Private Line Automatic Ringdown (PLAR) hotline service. The R-UVG is typically used at the RST. The R-UVG can be installed in the LET to support Direct-Inward-Dial (DID) applications. Each R-UVG circuit can be independently provisioned as a D4 FXS, D4 DPO, TR-8 POTS or TR-8 DID circuit. The R-UVG card provides ring cadence following including ring-ping.

Mutliple Modes of Transmission

Three (3) modes of on-hook transmission are supported: between ring bursts, loop current feed open interval and provisionable full time. Forward disconnect is supported in POTS mode. The card also supports precision gain adjustment in 0.1 dB steps over a 12.0 dB range and automatic transmission loss switching with loop length (one step of 3 dB).

Testing Capabilities

The R-UVG card also supports multiple loop testing systems including Mechanized Loop Testing (MLT).

Mutliple Modes of Transmission

Three (3) modes of on-hook transmission are supported: between ring bursts, loop current feed open interval and provisionable full time. Forward disconnect is supported in POTS mode. The card also supports precision gain adjustment in 0.1 dB steps over a 12.0 dB range and automatic transmission loss switching with loop length (one step of 3 dB).

Easy Provisioning

From CUI or Tellabs Panorama EMS the R-UVG can also be provisioned to support œfirebar� (continuous) ringing, full time on-hook transmission and Private Line Automatic Ringdown (PLAR) hotline service. The R-UVG is typically used at the RST. The R-UVG can be installed in the LET to support Direct-Inward-Dial (DID) applications. Each R-UVG circuit can be independently provisioned as a D4 FXS, D4 DPO, TR-8 POTS or TR-8 DID circuit. The R-UVG card provides ring cadence following including ring-ping.

Physical

Height: 5.125 in (13.018 cm)
Width: 0.563 in (1.429 cm)
Depth: 10.5 in (26.67 cm)
Weight: 0.5 lb (0.23 kg)

Interfaces

  • Six (6) 2-wire circuits

Power Consumption

Maximum power consumption: 13.5 W
Typical power consumption: 3.3 W

Environmentals

Temperature: -40° to +149° F (-40° to +65° C)
Relative Humidity: 5“95% noncondensing
Altitude: Up to 10,000 feet

Compliance

  • TR-TSY-000057
  • TR-TSY-000303
  • GR-1089-CORE

General

End-to-end signaling delay (normal and reverse): < 50 msec
Pulse distortion (pw > 25 msec): < 5 msec
Maximum loop length (includes station): 1500 Ohms
Off-hook detection threshold: < 2.0 kOhms
On-hook detection threshold: > 7 kOhms
Open ckt. voltage: on hook transmission mode: 42 ± 2 V DC
Ring trip detector: > 2000 Ohms
Ring trip delay: < 150 ms
Audio Companding: μ law
Audio Normal input impedance: 600 Ohms
Nominal loss at loop resistance under 650 Ohms: -3 dB ± 0.2 dB
Nominal loss at loop resistance above 650 Ohms: 0 dB ± 0.2 dB
Adjustable gain range: A-D +3.0 to -9.0 dB, D-A -3.0 to +9.0 dB
Maximum VF overload level: +5.0 dBm
Single ended return loss: > 12 dB @ 300 Hz - 600 Hz; > 15 dB @ 600 Hz - 3.4 kHz
Longitudinal balance: > 58 dB @ 300 Hz - 3.4 kHz

LED Indicators

  • FAIL (red)
  • BUSY (green)

Management

  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS)

Software Support

  • Minimum base software FP16 and higher

Installations

  • Supported in Tellabs 1000 CBA

Ordering Information

  • R-UVG: 0110-0222

RST Universal Voice Grade (R-UVG)

SKU: 0110-0222 Category:

Remote Subscriber Terminal (RST) Universal Voice Grade (R-UVG) plug-in card provides six individually provisionable ground start or loop start circuits and supports reverse battery signaling for applications such as PBX off-premises lines. The R-UVG is the constant current loop feed counterpart to the L-UVG card, which installs in the Local Exchange
Terminal (LET). The R-UVG is direct-mapped (non-concentrated) to the corresponding L-UVG card and establishes six dedicated circuits.

RST Universal Voice Grade (R-UVG)

Features

  • Automatic or provisionable transmission gain (0.1 dB steps)
  • Ground Start and Loop start and Reverse battery signaling
  • Forward disconnect
  • Firebar continuous ringing
  • Private Line Automatic Ringdown (PLAR) hotline service
  • On-hook transmission
  • Remote test access to metallic tip and ring
  • Call Message Waiting Indicator (CMWI)

Features

Easy Provisioning

From CUI or Tellabs Panorama EMS the R-UVG can also be provisioned to support œfirebar� (continuous) ringing, full time on-hook transmission and Private Line Automatic Ringdown (PLAR) hotline service. The R-UVG is typically used at the RST. The R-UVG can be installed in the LET to support Direct-Inward-Dial (DID) applications. Each R-UVG circuit can be independently provisioned as a D4 FXS, D4 DPO, TR-8 POTS or TR-8 DID circuit. The R-UVG card provides ring cadence following including ring-ping.

Mutliple Modes of Transmission

Three (3) modes of on-hook transmission are supported: between ring bursts, loop current feed open interval and provisionable full time. Forward disconnect is supported in POTS mode. The card also supports precision gain adjustment in 0.1 dB steps over a 12.0 dB range and automatic transmission loss switching with loop length (one step of 3 dB).

Testing Capabilities

The R-UVG card also supports multiple loop testing systems including Mechanized Loop Testing (MLT).

Mutliple Modes of Transmission

Three (3) modes of on-hook transmission are supported: between ring bursts, loop current feed open interval and provisionable full time. Forward disconnect is supported in POTS mode. The card also supports precision gain adjustment in 0.1 dB steps over a 12.0 dB range and automatic transmission loss switching with loop length (one step of 3 dB).

Easy Provisioning

From CUI or Tellabs Panorama EMS the R-UVG can also be provisioned to support œfirebar� (continuous) ringing, full time on-hook transmission and Private Line Automatic Ringdown (PLAR) hotline service. The R-UVG is typically used at the RST. The R-UVG can be installed in the LET to support Direct-Inward-Dial (DID) applications. Each R-UVG circuit can be independently provisioned as a D4 FXS, D4 DPO, TR-8 POTS or TR-8 DID circuit. The R-UVG card provides ring cadence following including ring-ping.

Specifications

Physical

Height: 5.125 in (13.018 cm)
Width: 0.563 in (1.429 cm)
Depth: 10.5 in (26.67 cm)
Weight: 0.5 lb (0.23 kg)

Interfaces

  • Six (6) 2-wire circuits

Power Consumption

Maximum power consumption: 13.5 W
Typical power consumption: 3.3 W

Environmentals

Temperature: -40° to +149° F (-40° to +65° C)
Relative Humidity: 5“95% noncondensing
Altitude: Up to 10,000 feet

Compliance

  • TR-TSY-000057
  • TR-TSY-000303
  • GR-1089-CORE

General

End-to-end signaling delay (normal and reverse): < 50 msec
Pulse distortion (pw > 25 msec): < 5 msec
Maximum loop length (includes station): 1500 Ohms
Off-hook detection threshold: < 2.0 kOhms
On-hook detection threshold: > 7 kOhms
Open ckt. voltage: on hook transmission mode: 42 ± 2 V DC
Ring trip detector: > 2000 Ohms
Ring trip delay: < 150 ms
Audio Companding: μ law
Audio Normal input impedance: 600 Ohms
Nominal loss at loop resistance under 650 Ohms: -3 dB ± 0.2 dB
Nominal loss at loop resistance above 650 Ohms: 0 dB ± 0.2 dB
Adjustable gain range: A-D +3.0 to -9.0 dB, D-A -3.0 to +9.0 dB
Maximum VF overload level: +5.0 dBm
Single ended return loss: > 12 dB @ 300 Hz - 600 Hz; > 15 dB @ 600 Hz - 3.4 kHz
Longitudinal balance: > 58 dB @ 300 Hz - 3.4 kHz

LED Indicators

  • FAIL (red)
  • BUSY (green)

Management

  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS)

Software Support

  • Minimum base software FP16 and higher

Installations

  • Supported in Tellabs 1000 CBA

Ordering Information

  • R-UVG: 0110-0222

News Releases

Corporate news releases recognizing significant achievements of Tellabs operations, products, solutions and customers.

Case Studies

Hear directly from our customers about their successful installations, quantifiable benefits and sincere testimonials.

Events

Up-coming conferences, seminars and webinars where Tellabs products, solutions and people will be actively participating.

Blogs & Articles

Read these short, and regularly updated, opinion pieces covering contemporary industry and technology topics.

White Papers

Download our non-vendor specific overviews meant to help readers understand an issue, solve a problem, or make a decision.

Videos

Media to educate and advocate our products, technologies or services, and offer direct insight into our customer references and user case studies.

Enterprise

Tellabs Optical LAN is a true enterprise centric solution that offers a better means of designing and operating networks inside buildings and across extended campuses.

Broadband

Tellabs 1000 MSAP (aka T1000, DMAX, AFC, UMC) is the industry’s only Broadband Digital Loop Carrier platform that converges legacy copper and modern fiber connectivity.

Technical Assistance Center

Address your questions and challenges quickly with our award winning TAC. Flexible support options to meet your needs.

Professional Services

From small projects to migrations to full turn key services, Tellabs is here to help.

Training

Preparation is the key to success.  Get your team ready to plan, deploy and manage your Tellabs Network. Check our our Training Curriculum today!

Credentials

You worked hard in Training, now it's time to show your new credentials off to the World through our Digital Credentialing Program!

Become a Partner

The Tellabs Advantage Partner Program is designed to offer our partners exceptional opportunities to grow your business, increase revenue and gain unique solution differentiation.

Find a Partner

For our end-customers, our Tellabs Advantage Partner Program offer best-in-breed services that match specific vertical markets and geographical regions with the end-customers exact needs in mind.

Leadership

Meet the Tellabs leadership team that represents diverse areas of expertise, and who are committed to exceeding the expectations of our employees, partners and customers.

Our Team

The Tellabs’ team is passionate in their pursuit of excellence in the office, their community and the greater industry.

Careers

Visit Tellabs’ online careers pages to see if there is a job opportunity that matches your ambitions. We offer excellent pay, benefits and career advancement possibilities.

Contact

Tellabs offer several easy options for contacting us. You can connect with us today via phone, email, online forms, or through social media channels.