Contact
Home > Broadband > T1000 > CLEC >
1048 Channel Bank Assembly (CBA) 1RU Fan Tray
The Tellabs™ 1048 Channel Bank Assembly (CBA) Fan Tray is 1 RU tall and 10 inches wide, and contains four 4 5/8-inch variable-speed fans and a controller board. Its purpose is to blow air upward through the CBA1048 card cage to cool the installed cards. Accordingly, it goes in the lowest position of the Wall-Mount Swing Rack or below the CBA1048 card cage when installed in a standard equipment rack using an optional Equipment Rack Mounting Bracket.

Features and Benefits

  • Part of our CBA1048 Fiber-to-the-Business Solution
  • Maximum 800 CFM airflow (200 CFM per fan)
  • Temperature and Fan Speed Control
  • Status and Alarm LED Indicators
  • Push-button on the front panel runs a self test
  • Life span measured at 70,000 hours at 77º F (25º C)
Product Gallery
Gallery Thumbnail

Included Highlights

Powering Options

Power for the CBA1048 1RU Fan Tray comes from either one or two Rectifier Modules in a Rectifier Shelf installed at the top of the Wall-Mount Swing Rack (all optional), or from existing –48-VDC power in the room. When using dual DC power sources, if one source should fail, the CBA1048 Fan Tray switches over to the alternate source. A cable assembly (optional) connects –48-VDC power from one or two DC sources to the CBA1048 card cage and the Fan Tray. It also connects the Fan Tray alarm output to the CBA1048 backplane fan alarm input.

Temperature and Fan Control

The internal controller board adjusts the speed of the fans based on the ambient air temperature flowing into the fan intakes, and sends an alarm signal to the CBA1048 card cage backplane PCB if a fan should fail.

Easy Installation

The CBA1048 Fan Tray has a 14-pin Molex connector socket, two LED indicators, and a membrane push-button switch on the front panel. The connector on the Fan Tray front panel is the input for –48-VDC power and the alarm output to the CBA1048 when a fan fails.

Status and Alarm LED indicators

The CBA1048 Fan Tray has status LED indicator on the front panel lights solid green when the Fan Tray is operating normally. The Alarm LED indicator on the front panel lights solid red when the Fan Tray is in an alarm condition. The Test push-button on the front panel runs a self test on the Fan Tray when pressed and released.

Specifications

Installations
  • Connectors: 14-pin Molex connector on front panel
Physical
  • Height: 1.7 in (4.3 cm) 1 RU
  • Width: 9.8 in (24.9 cm)
  • Depth: 11.3 in (28.7 cm)
  • Weight: 7 lbs (3.2 kg)
Environmental
  • Operating temperature: -40° C to +65° C (-40° F to +149° F)
  • Storage temperature: -40° C to +70° C (-40° F to +158° F)
  • Humidity: 5%–95% non-condensing Mounting (Stacked configuration)
Materials
  • Zinc-plated steel
Compliance
  • NEBS (GR-1089 Issue 6 and GR-63 Issue 4) Compliant
  • UL-60950-1 (issue 2014)
  • CSA C22.2#60950-1 (issue 2014)
Performance
  • Airflow: 800 CFM, maximum (200 CFM per fan)
  • Life span: 70,000 hours at 77º F (25º C)
Power
  • Supply voltage: –48 VDC
  • Supply current maximum: 2 Amps
  • Power consumption maximum: 90 Watts
Product Specifications Sheet

1048 Channel Bank Assembly (CBA) 1RU Fan Tray
Product Specifications
Related Services
Technical Support

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

Learn More
Professional Services

The right professional network services to help you successfully plan, design, install, and operate your network.

Learn More
Digital Credentials

Digital versions of your Tellabs-earned training credentials that can be used in email signatures, digital resumes, and on social media sites.

Learn More
Training

Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Learn More

Similar Products

1RU Fan Tray Unit

T1000
  • Temperature control and fan speed control
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • A test switch on the fan tray front panel allows the fans to be manually tested for correct functioning.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • In the event of fan tray failure, the fan tray alarm relays communicate with the appropriate alarm monitoring interface.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans

Related Products

Small 1048 Channel Bank Assembly (CBA)

T1000
  • Supports traditional narrowband and modern broadband services
  • Equip with TDM, SONET or Ethernet plug-in cards
  • Capable of 100% xDSL fill rate
  • -48v power rail to all slots
  • Rapid deployment from any existing cabinet
  • Full NMS control integrates existing access networks
  • Alarm contact closure wire-wrap posts
  • Wire-wrap backplane only for complete flexibility on a slot per slot basis
  • On-board craft port with A/B switch for modem interface
  • Variable speed fan tray assembly

1048 Channel Bank Assembly (CBA) Wall-Mount Swing Rack

T1000
  • Right-sized and low-cost customer premises Remote Subscriber Terminal (RST) solutions
  • Satisfies a wide variety of applications, such as FTTB, MTU, MDU, mobile backhaul and temporary events
  • Cost effective extension of the operational footprint of embedded base of Tellabs 1000 MSAP
  • Supports both copper and fiber-based transport while delivering TDM, xDSL and Ethernet services
  • Fill CBA1048 up to 100% with optimal plug-in cards for maximum capacity
  • The lowest cost, least disruptive and fastest time to market access solutions for service providers
Email Us
To place an order or reach customer service, email directly at
Enterprise
Tellabs-Enterprise-OM@tellabs.com
Broadband
Tellabs-Broadband-OM@tellabs.com
Technical Support
technical.services@tellabs.com
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
+1 972 588 7000
Technical Assistance Center (TAC)
+1 800 690 2324