The 23-inch Fan Tray has status LED indicator on the front panel lights solid green when the Fan Tray is operating normally. The Alarm LED indicator on the front panel lights solid red when the Fan Tray is in an alarm condition. The Test push-button on the front panel runs a self-test on the Fan Tray when pressed and released.
The internal controller board adjusts the speed of the fans based on the ambient air temperature flowing into the fan intakes and sends an alarm signal to the Tellabs 1150 if a fan should fail.
The Fan Tray can circulate 1600 CFM of air flow. The Fan Tray air flow discharges vertically. A third Fan Tray is not necessary, when two (2) Tellabs 1150s are installed, since two (2) Fan Trays provide sufficient cooling.
The Tellabs 1150 23-inch Fan Tray has a 14-pin Molex connector socket, two LED indicators, and a self-test switch on the front panel. The connector on the Fan Tray front panel is the input for –48-VDC power and the alarm output should fan fail.
Ongoing network support services to ensure peak performance during the operation and maintenance of your network.
The right professional network services to help you successfully plan, design, install, and operate your network.
Digital versions of your Tellabs-earned training credentials that can be used in email signatures, digital resumes, and on social media sites.
Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.