Contact
Home > Broadband > T1000 > CLEC > DSL Connectivity
ADSL2+ 6+0B Plug-in Card with Bonding
The ADSL2+ 6+0B is a high-performance line card that supports high-speed data and video applications in your Tellabs™ 1000 Multiservice Access Platform (MSAP). The low-power card delivers broadband service over a single copper pair or via two adjacent bonded copper pairs. ITU G.998.1, an industry-standard technology, doubles downstream service rates and increases upstream service, making it ideal for small and home business applications. This improved delivery enhances revenue from your embedded base of Tellabs 1000 MSAP equipment.

Features and Benefits

  • Dual memory for minimal service-affecting upgrades
  • Compatible with both CPU-2 and CPU-3
  • High performance provides higher bit rate and broader reach
  • Low power/heat dissipation for increased capacity
  • Supports ADSL2 Reach Extended (RE) option for longer reach
  • Provides ADSL2 power saving states
  • Up to 48 VCCs per card
  • Six integrated ports of ADSL2+ (with bonding capability) and POTS
  • Up to 20 cards per Tellabs 1000 MSAP shelf
  • Unspecified Bit Rate (UBR), Constant Bit Rate (CBR) and Variable Bit Rate Real Time (VBRrt)
  • Receives and responds to F5 Operations and Maintenance (OAM) loopback cells
Product Gallery
Gallery Thumbnail

Included Highlights

Business services

Also, this same ADSL2+ 6+0B card supports Annex M which is an excellent choice for small business services and home office services.

Residential services

This ADSL2+ 6+0B card is ideal for DSL overlay. Its rich feature-set and power-saving options provide you with optimum capital and operating savings. You can start marketing IPTV and VoD services on existing embedded systems. You can also increase high-speed Internet rate packages and increase associated revenue.

Gain full capacity

You can configure the Tellabs 1000 channel bank with ADSL2+ 6+0B cards to provide 120 lines per shelf. The card is hardened for remote cabinet and harsh environment deployments. Reach Extended and Cabinet Mode options extend broadband service deeper into your network.

High speed connectivity

The ADSL2+ 6+0B card provides bit rates up to 24 Mbps downstream and over 1.4 Mbps upstream on a single copper pair. By bonding two adjacent ports, you can achieve 48 Mbps downstream and over 2.8 Mbps upstream. These higher bit rates help you keep up with the growing broadband demands of IPTV, VoD, HSI and Over-the-Top services.

Specifications

Physical
  • Weight: 0.23 kg (0.5 lbs)
  • Depth: 26.67 cm (10.5 in)
  • Width: 1.429 cm (0.563 in)
  • Height: 13.018 cm (5.125 in)
Interfaces
  • Six integrated ports of ADSL2+ (with bonding capability) and POTS
Power Consumption
  • 9.77 W (@ 100% DSL)
Alarm / Monitor / Test
Environmentals
  • Operating temperature: -40 F to +149 F (-40 C to +65 C)
  • Relative humidity: 5%-95% noncondensing
Compliance
  • NEBS 3
  • ITU-T G.998.1 ATM-based multipair bonding
  • ITU-T G.994.1
  • ITU-T G.992.5 (Annex M, A and L)
  • ITU-T G.992.5
  • ITU-T G.992.3 (Annex M, A and L)
  • ITU-T G.992.3
  • ITU-T G.992.2
  • ITU-T G.992.1
  • ANSI T1.413-1998
  • GR-1089-CORE
  • GR-63-CORE
  • GR-TSY-000303
  • TR-TSY-000057
General
  • Input Impedance 100 ohms @ 30 kHz to 2.2 MHz
  • ADSL2+ data rate is theoretical rate and reach based on ideal conditions
  • Upstream (Annex M): Rate adaptive up to 3.3 Mbps in 32 Kbps increments
  • Upstream (2 bonded pairs): Rate adaptive up to 2.8 Mbps in 32 Kbps increments
  • Upstream: Rate adaptive up to 1.4 Mbps in 32 Kbps increments
  • Downstream (2 bonded pairs): Rate adaptive up to 48 Mbps in 32 Kbps increments
  • Downstream: Rate adaptive up to 24 Mbps in 32 Kbps increments
LED Indicators
  • Green, nonblinking SYNC - one or more ADSL circuits are enabled and trained up with the CPE
  • Green, nonblinking BUSY - one or more ADSL circuits are active
  • Red, blinking FAIL - one or more ADSL circuits are receiving illegal signaling
  • Red, nonblinking FAIL - plug-in card failure or card is unable to communicate with the CPU
Management
  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS)
Software Support
  • Minimum base software FP15 and higher
Installations
  • Supported in Tellabs 1000 CBA
Product Specifications Sheet

ADSL2+ 6+0B Plug-in Card with Bonding
Product Specifications
Related Services
Technical Support

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

Learn More
Professional Services

The right professional network services to help you successfully plan, design, install, and operate your network.

Learn More
Digital Credentials

Digital versions of your Tellabs-earned training credentials that can be used in email signatures, digital resumes, and on social media sites.

Learn More
Training

Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Learn More

Related Products

Small 1048 Channel Bank Assembly (CBA)

T1000
  • Supports traditional narrowband and modern broadband services
  • Equip with TDM, SONET or Ethernet plug-in cards
  • Capable of 100% xDSL fill rate
  • -48v power rail to all slots
  • Rapid deployment from any existing cabinet
  • Full NMS control integrates existing access networks
  • Alarm contact closure wire-wrap posts
  • Wire-wrap backplane only for complete flexibility on a slot per slot basis
  • On-board craft port with A/B switch for modem interface
  • Variable speed fan tray assembly
Email Us
To place an order or reach customer service, email directly at
Enterprise
Tellabs-Enterprise-OM@tellabs.com
Broadband
Tellabs-Broadband-OM@tellabs.com
Technical Support
technical.services@tellabs.com
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
+1 972 588 7000
Technical Assistance Center (TAC)
+1 800 690 2324