FlexSym Optical Network Terminal 205 (ONT205)
[Limited Availability] The Tellabs FlexSym Optical Network Terminal 205 (ONT205) offers 5-ports of Ethernet and multiple deep fiber mounting options. The Tellabs FlexSym ONT205 provides flexible and symmetrical extended Ethernet connectivity over a 10 gigabit passive optical network at multi-rate 1G, 2.5G, 5G and 10G Ethernet speeds. It supports advanced IEEE features, such bridging, LAG, VLAN, ACL, PoE, LLDP, NAC, 802.1x, AS-SIP, and other must-have protocols that satisfy true enterprise requirements.

Features and Benefits

  • Supports Dante and CobraNet digital audio systems over IP
  • Bi-directional AES-128 encryption with 60 second churning of keys
  • Enclosure's fire retardant plastic passes plenum fire test
  • Four (4) 10/100/1000 and one (1) 10G interface with Power over Ethernet support for 4PPoE supporting 802.3af/at/bt
  • Overlay ITU 984 G-PON ONTs with ITU G.9807.1 XGS-PON 10G ONT on same fiber protecting existing infrastructure investments
  • Deliver 10G capacity only where necessary to optimize space, energy and monetary issues associated with 10G
  • ONT205 supports 1G, 2.5G, 5G and 10G as needed properly aligning network design with true traffic requirements
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Management can be server, laptop, tablet, cloud-based and lays the foundation for future software defined networking automation.

Included Highlights

Advanced IP and Ethernet

Tellabs ONT205 offers industry-leading software-defined traffic management, security, provisioning and quality of service mechanisms. It supports enterprise VoIP connectivity with the latest unified communications systems and all enterprise IP-based video traffic (e.g., entertainment, surveillance, conferencing). Tellabs FlexSym Series enterprise focused means that advanced Ethernet IEEE features, such bridging, LAG, VLAN, ACL, PoE, LLDP, NAC, 802.1x, AS-SIP, and other must-have protocols are supported that satisfy true enterprise requirements.

Centralized Management

All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being controlled by the Tellabs Panorama PON Manager helps speed installations and daily operations. Centrally controlled by the Panorama PON Manager, the Tellabs ONT205 supports auto-discovery mechanisms, can be quickly provisioned using global templates and profiles, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes for everyday operations.


The Tellabs FlexSym ONT205 offers 5-ports of Ethernet with options for 1G, 2.5G, 5G and 10G speed connectivity. It provides flexible choices for designing a modern enterprise network to exactly align with contemporary connectivity such as IoT, wireless, open/shared office and smart buildings demands. Efficiently converge all enterprise connectivity by leveraging fiber cabling’s limitless capacity deep into your buildings and campus by exactly equipping the ONT205 with the precise 1M, 10M, 100, 1G, 2.5G, 5G and 10G speed that is warranted – thus, minimizing energy and costs.

Power over Ethernet (PoE)

For Power over Ethernet (PoE), IEEE 802.3af PoE, PoE+ IEEE 802.3at (Class-4 negotiations) and IEEE 802.3bt (4PPOE) can be selected. The ONT can support three ports of 4PPoE supporting 802.3af/at/bt. The maximum PoE power when local powered is 140 watts and the maximum PoE power when remote powered is 90 watts.

Mounting Choices

Deliver virtualized Ethernet port extensions deep into enterprise by mounting ONT on wall, floor, ceiling, even in plenum space, hidden inside office furniture, behind façade, on top or underneath desks. Uses same mounting bracket as ONT142R and ONT180C. Interface plate exists to allow mounting to all existing Tellabs brackets.

Ultimate Security

Tellabs FlexSym ONT205 also support industry leading bi-directional AES-128 encryption with 60 second churning of keys.

Powering Options

Tellabs ONT205 powering options include both local AC and remote DC. For local AC power, power adaptors are used to transform 120 AC power from the wall plug to 48 DC power delivered to the ONT. The AC power adaptor provides enough power for the ONT to supply up to 140W of PoE power. For the remote DC power option, a centrally located bulk rectifier can be used, and 48 VDC power is delivered over CATx cables or new hybrid fiber/copper cables. Remote powering option uses a centrally located bulk power plant, emergency power and bulk battery back-up.


  • Weight: 1.1 lbs
  • Depth: 5.84 in
  • Width: 10.07 in
  • Height: 1.86 in
  • Four (4) 10/100/1000Base-T Gigabit Ethernet RJ-45 connectors autosensing MDI/MDIX
  • One (1) IEEE 802.3bz and 802.3an with 10M/100M/1G/2.5G/5G/10G with auto-negotiation
  • BBU Part Number: 81.16G-DSKTPBBU-R6 (does not include the PSU)
  • Remote Power Connector: Phoenix (supports 12-26 AWG wire)
  • AC Adapter Input: 2.0A@100-240VAC, 50-60Hz
  • AC Adapter Output: 54V@2.78A (150W)
  • Local ONT Power Connector (PSU connector): B-Type
  • Local Battery Backup (BBU): optional
  • Local Power Supply Unit (PSU): not included
  • PSU Part Number when using BBU - 81.11P-PWIL81WH-R5
  • Dying Gasp support
  • PSU Part Number when not using BBU - use PSU 81.11P-PWIL81WM (PSU with Molex)
  • Input at ONT (volts): 48–56 VDC
  • Consumption Idle (watts): 10 W
  • Max PoE Power via local AC power: 140W
  • Max PoE Power via remote power: 90W
  • Local Power BBU Alarm/Monitor Connector: 8-pin
  • PoE: 802.3af/at, class 0-4, up to 30W per port on all ports
  • PoE: Cisco UPoE Support with up to 60W on 3 high power ports.
  • PoE: 802.3bt 4PPoE class 5-6, up to 60W per port on 3 high power ports.
  • Virtual switch based on 802.1Q VLAN
  • 1024 MAC addresses
  • 25 VLANs per Ethernet port
  • VLAN tagging/detagging, marking/remarking per Ethernet port
  • VLAN translation, trunking and stacking
  • IPv6 capable for enterprise services
  • IGMP v2/v3 snooping
  • IEEE 802.1x Port-Based Authentication/MAB
  • Link Layer Data Protocol (LLDP) for autoprovisioning, inventory and PoE power management.
  • QoS and security policies based on VLAN-ID, 802.1p, DSCP
  • MAC address limiting to prevent flooding attacks and limiting the number of devices attached to a port
  • L2-L4 Access Control Lists (ACLs)
  • Upstream ACL rate limiting
  • Supports Dante and CobraNet digital audio systems over IP
  • Network Access Control (NAC)
  • VLAN trunking and stacking
Operations, Administration and Maintenance (OAM)
  • Complete service provisioning, such as Ethernet and VoIP
  • Holds two versions of software with image integrity checking and automatic rollback
  • Standards-compliant OMCI as defined in ITU-T G.988
  • Alarming, events and performance monitoring
  • Remote image download over OMCI as well as activation and rebooting
  • Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get & Get Next commands
  • Temperature: 0° C to 50° C
  • Relative humidity: 5% to 85%, noncondensing
  • CE
  • FCC
  • UL
  • UL2043 plenum fire test
LED Indicators
  • PON — Link status
  • Ethernet link/Activity (per port)
  • Ethernet Speed (per port)
  • ONT has no local management access
  • Tellabs Panorama PON Manager
Software Support
  • Minimum base software SR31.0 and higher
  • Cubicle ONT mounts on a desktop, under a desk, on a wall, vertical, horizontal or free-standing – plenum rated for above ceilings
  • OLTs supported: OLT1150, OLT1150E, OLT1134AC, OLT1131, OLT6, OLT1
  • Built-in location indicator for easy installation and labeling identification
Passive Optical Network
  • Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
  • SFF-type laser SC/APC connector
  • Wavelengths: Downstream 1580 nm, Upstream 1280 nm
  • 9.95328 Gbps burst mode upstream
  • 9.95328 Gbps downstream receive
  • Laser compliant FCC 47 CFR Part 15
  • Class B and FDA 21 CFR 1040.10 and 1040.11, Class I
  • Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
  • Activation with automatically discovered Serial Number (SN) and password
  • ITU-T G.984.2 Amd1 Class B+
  • APD receiver and DFB transmitter
  • 4-9dBm launch power, -28 dBm sensitivity and -9 dBm overload
  • Bi-directional AES-128 encryption with 60 second churning of keys
  • Forward Error Correction (FEC)
  • IP DSCP to 802.1p mapping
  • Support for multicast GEM port
Ordering Information
  • Tellabs 205 ONT: 81.11G-ONT205
  • The development, release, and timing of features or functionality described for Tellabs’ products remains at Tellabs’ sole discretion. The information that is provided within this data sheet is not a commitment nor legal obligation to deliver any material, code or functionality.
Product Specifications Sheet

FlexSym Optical Network Terminal 205 (ONT205)
Product Specifications
Related Services
Technical Support

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

Professional Services

The right professional network services to help you successfully plan, design, install, and operate your network.

Digital Credentials

Digital versions of your Tellabs-earned training credentials that can be used in email signatures, digital resumes, and on social media sites.


Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Similar Products

Related Products

Email Us
To place an order or reach customer service, email directly at
Technical Support
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
Technical Assistance Center (TAC)