The Tellabs FlexSym OLT6 shelf is ideal for space-challenged installations in data centers, communications closets and outdoor remote cabinets. It has redundant power rectifiers integrated with the distribution shelf, resulting in faster installations. By integrating the power rectification, the time and material needed to install this
distribution shelf are significantly reduced. Just like all other Tellabs OLT distribution shelves, this Tellabs OLT6 leverages common software and common service cards. The OLT6 can be equipped with the Ethernet Switch Unit Thirty-Two (ESU32) for wide area network connectivity and future 100G uplink capabilities of the next-generation Ethernet Switch Unit One-Hundred (ESU100).
The Tellabs FlexSym OLT6 distribution shelf supports 4 multi-purpose plug-in card slots that can be equipped from 4 to 32 PON ports. The OLT6 is architected with the necessary capacity for ITU-T 984 G-PON (2.5G), ITU-T 987/9807 symmetrical XGS-PON (10G) and beyond. There are two Ethernet Switch Unit plug-in card slots that can support from 1 to 4 10G and 4 to 8 1G wide-area network connections. The OLT6 is designed from day-1 to support future the 100G uplink capabilities of the next-generation Ethernet Switch Unit One-Hundred (ESU100).
The Tellabs OLT6 distribution shelf-high availability configurations allowing redundant Ethernet Switch Units, Common Controls, Timings, Powering, Fans and Network Uplinks. Non-service affecting sideswitching, fail-over, or card-swapping at less than 50ms and any failover of redundantly deployed cards generates an alarm while service remains intact is supported by the OLT6.