FlexSym Singlemode to Multimode 2x16 Splitter
[Limited Availability] The Tellabs FlexSym Singlemode to Multimode 2x16 Splitter enable the cost-effective re-use of existing multimode fiber infrastructure inside buildings and across campuses. Tellabs FlexSym SM-MM 2x16 Splitter is ideal in scenarios where there is SMF cabling between buildings and MMF cabling within buildings. It also can be used when SMF cable is between main data center (MDF) to telecom closet (IDF) and MMF cable runs from telecom closet through-out access network (i.e. horizontal and drops).

Features and Benefits

  • Supports OM1, OM2, OM3, and OM4 multimode fiber cabling
  • Completely passive operation with no power or maintenance required
  • Allows re-use of multimode fiber cabling from the splitter location to where the ONTs are mounted
  • Available in both 2x8, 2x16 and 2x32 splitter versions
  • Optional support for Type-B PON redundancy adding additional resiliency to the network design
  • Eliminates the cost of installing new singlemode fiber in the horizontal pathways and the final access drops
  • Allows full rate G-PON service over MM fibers up to 550 meters
  • Supports any length of singlemode fiber from the Tellabs OLT to the splitter up to the limit of the 28dB optical budget

Included Highlights

Stability

The Tellabs FlexSym SM-MM 2x16 Splitter provides industry leading fiber route diversity and geographically dispersed OLTs using FSAN-based Type-B PON redundancy. This redundancy provides for port-to-port, card-to-card and OLT-to-OLT protection back at the main data center. Network redundancy is an optional architecture for when the highest level for resiliency is required.

Overview

The Tellabs FlexSym SM-MM 2x16 Splitter is a mode adapting splitter that has Singlemode Fiber (SMF) ports on the Optical Line Terminal (OLT) side of the splitter and allows operation of 2.5G ITU-T 984 G-PON over Multimode Fiber (MMF) between the splitter and the Optical Network Terminals (ONT).

Scalability

Scale existing enterprise LAN regardless of SMF or MMF cabling. Repurpose installed MMF cabling to reach ONTs mounted in telecommunications rooms (intermediate distribution frames) within a building, or ONTs mounted in plenum space, above ceilings, below ceilings, in walls, in office cubicles or at desks, or even in main distribution frames in the main data centers of remote buildings.

Specifications

General
  • The development, release, and timing of features or functionality described for Tellabs’ products remains at Tellabs’ sole discretion. The information that is provided within this data sheet is not a commitment nor legal obligation to deliver any material, code or functionality.
Ordering Interface
  • Tellabs FlexSym SM-MM 2x16 Splitter (ST version): Part Number 81.SMFMMF2X16-ST
  • Tellabs FlexSym SM-MM 2x16 Splitter (LC version): Part Number 81.SMFMMF2X16-LC
Passive Optical Network
  • Operating wavelength: 1260 - 1625 nm
  • ITU-T G.984 G-PON standard
ONT Interface
  • Connector: LC/MMF/PC (ONT side)
  • MM fiber distance from splitter to ONT up to 550 meters
OLT Interface
  • ITU-T G.984 G-PON standard
  • Type-B PON redundancy option
  • Connector: LC/SMF/PC (OLT side)
  • OLT to splitter Insertion Loss: 15 dB
  • Approximate distance OLT to splitter assuming no patch panel: 10 km
Installation
  • Rack mount installation
Compliance
Environmental
  • Temperature: -40° C to 70° C
  • Relative humidity: 5% to 85%, noncondensing
Physical
  • Height: 1.75 in / 44 mm
  • Width: 19 in / 486 mm
  • Depth: 10 in / 254 mm
  • Weight:
Product Specifications Sheet

FlexSym Singlemode to Multimode 2x16 Splitter
Product Specifications
Related Services
Technical Support

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

Professional Services

The right professional network services to help you successfully plan, design, install, and operate your network.

Training

Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Email Us
To place an order or reach customer service, email directly at
Technical Support
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
Technical Assistance Center (TAC)