Contact
Home > Broadband > T1000 > CLEC > Class-5 Switch Replacement
IP-POTS
[Limited Availability] The Tellabs IP-POTS (IP-POTS) VoIP plug-in card provides six (6) ports of traditional analog POTS service, with all CLASS POTS services supported, and provides the VoIP functionality that converts TDM to VoIP. The Tellabs 1000 Multiservice Access Platform (MSAP) is a proven network element that enables the elimination of TDM hosts and remote switches. The Tellabs 1000 IP-POTS card uses the Session Initiation Protocol (SIP) for signaling to support the same functionality as traditional analog POTS, eliminating the need for TDM switch terminations. Thus, service providers can cost-effectively transition all existing TDM POTS lines to VoIP and retire their TDM switches.

Features and Benefits

  • Six (6) ports of traditional analog POTS circuits
  • Installs into any Tellabs 1000 MSAP broadband DMAX shelf
  • Any transport card can be used for the host-remote link
  • GbE222 card in uplink mode, supports up to 10,000 IP sessions
  • Up to 132 POTS lines per shelf (22 IP-POTS cards per shelf)
  • Up to 912 lines per bay (132 lines/shelf times 7 expansion shelves)
Product Gallery
Gallery Thumbnail

Included Highlights

Graceful Migration

Eases the network transformation from TDM/Analog based services to IP services, and provides deployment flexibility, and scalability down to the slot level.

Proven Solution

Minimizes internal deployment requirement, and project management impact, while leveraging embedded, approved and operationalized equipment.

Repurpose Space

Lessens building footprint requirements providing options to reuse real estate space for other revenue generating purposes.

Modern Advantages

Compared to out-dated TDM switches, this contemporary solution lowers power usage, and delivers better reliability, with optimized modern componentry.

Cost Effective

Transition all existing TDM POTS lines to VoIP, and retire TDM switches, thus reduce day-1 CapEX, and year-over-year OpEx, and avoid expensive 3rd party media gateway equipment.

Maximize Revenue

Supports both broadband, and narrowband services, without sacrificing revenue, and in many cases, this solution can help increase revenue.

Specifications

SIP
  • DTMF dialing
  • Five (5) REN load
  • Balanced ring at 55 V RMS
  • T.38/T.30 fax
  • G.711 for fax, modem connection and TTY devices
  • Full class service support (including CWMI)
  • RTP (RFC3550/3551)
  • SDP (RFC-2327)
  • SIP (RFC-3261)
  • Various CLASS services (FSK)
  • Echo cancelling, VAD and CNG
POTS
  • On-hook transmission (CLASS) capability
  • Forward disconnect
  • 900 Ohm local exchange impedance
  • 1830 Ohm maximum DC supervision range
  • Six (6) 2-wire circuits per unit
  • Transient protection for outdoor bridging
  • Loop testing support including MLT
Alarm / Monitor / Test
  • Break Dial Tone in TDM or VoIP
  • GR909 Drop Testing and Draw
LED Indicators
  • FAIL (Red)
  • BUSY (Green)
  • VOIP (Amber, Green)
Ordering Information
  • Limited Availability
  • Part Number: 0110-0285
General
  • The development, release, and timing of features or functionality described for Tellabs’ products remains at Tellabs’ sole discretion. The information that is provided within this data sheet is not a commitment nor legal obligation to deliver any material, code or functionality.
Management
  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS) release 12.0 and higher
Software Support
  • Minimum base software FP18 and higher
Installation
  • Supported in any broadband DMAX Tellabs 1000 CBA
Physical
  • Temperature: -40° to +149° F (-40° to +65° C)
  • Height: 5.125 in (13.018 cm)
  • Relative Humidity: 5–95% noncondensing
Power Consumption
  • Typical power consumption: TBD
  • Maximum power consumption: TBD
Interfaces
  • Six (6) 2-wire circuits
Compliance
  • GR-1089-CORE
Product Specifications Sheet

IP-POTS
Product Specifications
Related Services
Technical Support

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

Learn More
Professional Services

The right professional network services to help you successfully plan, design, install, and operate your network.

Learn More
Digital Credentials

Digital versions of your Tellabs-earned training credentials that can be used in email signatures, digital resumes, and on social media sites.

Learn More
Training

Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Learn More

Similar Products

Related Products

Email Us
To place an order or reach customer service, email directly at
Enterprise
Tellabs-Enterprise-OM@tellabs.com
Broadband
Tellabs-Broadband-OM@tellabs.com
Technical Support
technical.services@tellabs.com
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
+1 972 588 7000
Technical Assistance Center (TAC)
+1 800 690 2324