Contact
Home > Broadband > T1000 > CLEC > 911 Redundancy
Ethernet Service 10/100 (ES10/100)
The Ethernet Service 10/100 plug-in card (ES 10/100) can deliver Ethernet services to business premises, Multiple Dwelling Units (MDUs) and cell site base stations. The ES 10/100 is supported in the Tellabs 1000 Multi-service Access Platform (MSAP) and can be located in any of the multi-purpose shelf slots.

Features and Benefits

  • Supports two independent 10/100 Mbps Ethernet interfaces in a single slot.
  • Provides up to 200 Mbps of bi-directional traffic per card
  • Both fiber-based and copper-based SFP options
  • Single-mode and multi-mode fiber
  • Upstream rate limiting
  • Dual memory support for upgrades
Product Gallery
Gallery Thumbnail

Included Highlights

End-to-End Ethernet

Used in conjunction with Gigabit Ethernet Transceiver (GbE222) card in transport and network uplink configurations, the Tellabs 1000 MSAP can deliver end-to-end Ethernet interfaces. Even better, these Ethernet-based interfaces can be deployed without abandoning revenue-generating legacy Time Division Multiplexing (TDM) and Special Services that are delivered simultaneously from within the same Tellabs 1000 MSAP shelf

Standards-Based Ethernet

Standards-based Ethernet is support with VLAN tagging per IEEE 802.1q, prioritization per IEEE 802.1p and Transparent LAN Services (TLS) when used with GbE222 plug-in card. Jumbo Ethernet frames supported up to 2,000 bytes Maximum Transmission Unit (MTU). And, Service Level Agreements (SLA) capable with Committed Information Rate (CIR) and Committed Burst Size (CBS).

Ethernet, ATM and TDM Interworking

Asynchronous Transfer Mode (ATM), TDM and Ethernet interworking is achieved with ATM-to-Ethernet Connection (AEC), Ethernet-to-Ethernet Connection (EEC) and Ethernet-to-ATM Connection (EAC) supported across the Tellabs 1000 MSAP system.

End-to-End Ethernet

Used in conjunction with Gigabit Ethernet Transceiver (GbE222) card in transport and network uplink configurations, the Tellabs 1000 MSAP can deliver end-to-end Ethernet interfaces. Even better, these Ethernet-based interfaces can be deployed without abandoning revenue-generating legacy Time Division Multiplexing (TDM) and Special Services that are delivered simultaneously from within the same Tellabs 1000 MSAP shelf

Specifications

Physical
  • Weight: 0.5 lb (0.23 kg)
  • Depth: 10.5 in (26.67 cm)
  • Width: 0.563 in (1.429 cm)
  • Height: 5.125 in (13.018 cm)
Interfaces
  • Copper 100BASE-T SFP ordered separately
  • Long Range 100BASE-LX10 optics SFP ordered separately
  • Short Range 100BASE-FX optics SFP ordered separately
  • Two (2) 10/100 Mbps Ethernet
Power Consumption
  • Typical power consumption: 9.6 W
  • Maximum power consumption: 13 W
Environmentals
  • Altitude: Up to 10,000 feet
  • Relative Humidity: 5–95% noncondensing
  • Temperature: -40° to +167° F (-40° to +75° C)
Compliance
  • Restriction of Hazardous Substances Directive (RoHS)
  • GR-1089-Core
  • GR-57-Core
  • GR-63-Core
General
  • IEEE 802.3u CSMA/CD 100BASE-T
  • IEEE 802.1Q VLAN
  • IEEE 802.3ad Link Aggregation
  • IEEE 802.1p Priority Queues
  • IEEE 802.3z Gigabit Ethernet Physical Layer
  • IEEE 802.1D Media Access Control (MAC) Bridges
  • TR-101 Migration to Ethernet-based DSL Aggregation
  • IEEE 802.3ah Carrier Sense Multiple Access Collision Detection (CSMA/CD)
  • IEEE 802.3x Flow Control
  • RFC 3376 Managing Multicast Forwarding
  • RFC 2819 Ethernet Traffic Statistic
  • IETF RFC 2684 Multiprotocol Encapsulation over ATM
  • IETF RFC 826 Address Resolution Protocol
LED Indicators
  • FAIL (red)
  • ACTIVE (green)
  • LINK 1 (green)
  • LINK 2 (green)
Management
  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS)
Software Support
  • Minimum base software FP16 and higher
Installations
  • Supported in Tellabs 1000 CBA
Ordering Information
  • ES10-100: 0110-0269
  • Short Range 100BASE-FX optics SFP: 0410-0464
  • Long Range 100BASE-LX10 optics SFP: 0410-0463
  • Copper 100BASE-T SFP: 0410-0465
Product Specifications Sheet

Ethernet Service 10/100 (ES10/100)
Product Specifications
Related Services
Technical Support

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

Learn More
Professional Services

The right professional network services to help you successfully plan, design, install, and operate your network.

Learn More
Training

Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Learn More

Similar Products

Gigabit Ethernet Transceiver 222 (GbE222)

T1000
  • Traffic management on a per flow basis
  • Dynamic MAC learning with support for up to 8,000 MAC addresses
  • 4096 VLANs (802.1q) and stacked VLAN support (IEEE 802.1ad)
  • Retain, add, modify and remove subscriber VLAN (C-Tag) and network VLAN (S-Tag)
  • Queuing priority (IEEE 802.1p) and mapping to Asynchronous Transfer Mode (ATM) Quality of Service (QoS) traffic profiles
  • Data services such as Transparent LAN Service (TLS)
  • Multicast support with IGMP Snooping and Proxy for IGMPv2 and IGMPv3
  • Dual memory for minimal service interruption during programming/software upgrades

10 Gigabit Ethernet 226 (GbE226) – Limited Availability

T1000
  • Two 1G/10G Ethernet ports enhanced small form-factor pluggable (SFP+)
  • Four 10/100/1000 Ethernet ports small form-factor pluggable (SFP)
  • Port filtering
  • Flexible configuration of 10G uplinks and 1G aggregation ports
  • QoS via IEEE 802.1P priority bits
  • IPv4 and IPv6 transparency
  • Six-Port Ethernet switch/hub with flexible uplink and tributary functionality
  • Flow control
  • Configurable Layer-2 learning
  • Spanning Tree forwarding
  • 1526 Byte Maximum Transmission Unit (MTU)
  • Standard SNMP based Ethernet statistics
  • Hardware support for future Synchronous Ethernet (SyncE) and IEEE 1588 Precision Time Protocol (PTP) timing
  • 6-Port Managed Layer 2-switch with VLAN awareness
  • SNMP based Ethernet statistics

Related Products

Small 1048 Channel Bank Assembly (CBA)

T1000
  • Supports traditional narrowband and modern broadband services
  • Equip with TDM, SONET or Ethernet plug-in cards
  • Capable of 100% xDSL fill rate
  • -48v power rail to all slots
  • Rapid deployment from any existing cabinet
  • Full NMS control integrates existing access networks
  • Alarm contact closure wire-wrap posts
  • Wire-wrap backplane only for complete flexibility on a slot per slot basis
  • On-board craft port with A/B switch for modem interface
  • Variable speed fan tray assembly
Email Us
To place an order or reach customer service, email directly at
Enterprise
Tellabs-Enterprise-OM@tellabs.com
Broadband
Tellabs-Broadband-OM@tellabs.com
Technical Support
technical.services@tellabs.com
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
+1 972 588 7000
Technical Assistance Center (TAC)
+1 800 690 2324