Contact
Home > Broadband > T1000 > CLEC > DSL Connectivity
VDSL2 6+6B Plug-in Card
[Limited Availability] Optimize your broadband strategy by expanding bandwidth service delivery capacity of Tellabs 1000 Multi-Service Access Platform (MSAP) with the new VDSL2 6+6B card. With the Tellabs VDSL2 6+6B, you can deliver integrated voice, data and video applications from the Tellabs 1000 MSAP taking advantage of both VDSL2 and ADSL2+ capabilities. The card supports broadband service over a single copper pair or via two adjacent bonded copper pairs. This enables operators to provide higher speed broadband services across existing copper Customer Service Areas (CSAs). Operating in both IP/Ethernet packet-based and ATM environments, the VDSL2 supports Packet Transfer Mode (PTM) traffic as well as ATM mode over copper.

Features and Benefits

  • Single card for all ADSL2+ and VDSL2 functions
  • Six ports of integrated DSL and POTS
  • Saves Cost and Minimizes Equipment Inventory
  • VDSL2, VDSL2 bonding, ADSL2+, ADSL2+ bonding, ADSL2+ PTM, ADSL2 and ADSL1
  • DSL Speeds Supported up to 100Mb/s
  • Provision via Craft User Interface (CUI) and Tellabs Panorama Element Management System (EMS)
Product Gallery
Gallery Thumbnail

Included Highlights

Leverage Existing Tellabs 1000 MSAP

Deploy rapidly, utilizing embedded base, to meet funding requirements and market by capitalizing on using existing copper plant.

Win More Broadband Stimulus Projects

Enables higher Connect America Fund (CAF) and Rural Digital Opportunity Fund (RDOF) speeds with minimal capital investment and more granular provisioning.

Expand Services Areas

Broaden service areas to serve more subscribers with greater bandwidth while economically serving higher speed connectivity to residential and business customers.

Provide More Premium Services

Deliver faster speeds to improve customer satisfaction and retention. Plus, increase premium service rates to generate more revenue.

Specifications

POTS Features
  • Six 2-wire POTS circuits per card
  • On-hook transmission (CLASS) capability
  • Forward disconnect
  • 900 ohm +2.16 µF local exchange impedance
  • 1830 ohm maximum DC supervision range
  • Support for GR-303, TR-8, and TR-57 switch interface configurations
  • Transient protection for outdoor bridging
  • Loop test support including MLT
  • Support for CMWI (Call Message Waiting Indicator)
POTS Signaling
  • End-to-end signaling delay (normal and reverse) < 50 msec
  • Pulse distortion (pw > 25 msec) < 15 msec
  • Ring trip detector sensitivity (85 Vrms, 20 Hz) < 2000 ohm
  • Ring trip delay (85 Vrms, 20 Hz) < 200 msec
  • Maximum loop length incl. station 1830 ohm @ 20 mA
  • Loop current @ -52 Vdc battery 23 mA constant, 2 × 300 ohm feed
  • Tip/ring open circuit voltage: Normal mode, -52 Vdc battery
  • On-hook transmission mode > 41 Vdc
  • Off-hook detection threshold < 2.0 k ohm
  • On-hook detection threshold > 10.0 k ohm
  • Audio Companding; µLaw
  • Nominal input impedance 900 ohm + 2.16 µF
  • Nominal loss (referenced to 2-wire 900 ohm ) 2.0 dBm ± 0.5 dB off-hook
  • Maximum VF overload level 5.0 dBm @ 600 ohm
  • Return loss (single frequency) > 18 dB (300 Hz to 3.4 kHz)
  • Echo return loss > 13 dB (300 Hz to 500 Hz) > 18 dB (500 Hz to 2.5 kHz) > 14 dB (2.5 kHz to 3.4 kHz)
General
  • The development, release, and timing of features or functionality described for Tellabs’ products remains at Tellabs’ sole discretion. The information that is provided within this data sheet is not a commitment nor legal obligation to deliver any material, code or functionality.
DSL Features
  • 1830 ohms total loop length including station
  • Downstream: rate adaptive up to 100 Mbps in 32 kbps increments
  • Upstream: rate adaptive up to 50 Mbps in 32 kbps increments
  • Downstream (two bonded pairs): rate adaptive up to 200 Mbps in 32 kbps increments
  • Upstream (two bonded pairs): rate adaptive up to 100 Mbps in 32 kbps increments
  • Single pair mode supports G.DMT, ADSL, ADSL2, ADSL2-annex L, ADSL2+, ADSL2+ PTM, VDSL2 profile 8a and VDSL2 profile 17a
  • Two pair bonded more supports ADSL2+, ADSL2+ PTM, VDSL2 profile 8a and VDSL2 profile 17a
Ordering Information
  • Limited Availability
  • VDSL2 6+6B: 0110-0284
Installations
  • Supported in Tellabs 1000 CBA
Software Support
  • Option for Tellabs Panorama Element Management
  • Supported in Tellabs 1000 MSAP Feature Package (FP) FP17.0.6 and higher
  • Holds two versions of software with image integrity checking and automatic rollback
Management
  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS)
LED Indicators
  • Red, non-blinking FAIL: plug-in card failure or card is unable to communicate with the CPU
  • Red, blinking FAIL: one or more ADSL circuits are receiving illegal signaling
  • Green, non-blinking BUSY: one or more ADSL circuits are active. Green, non-blinking SYNC
Compliance
  • G.993.2 (VDSL2)
  • G.992.1 (G.DMT)
  • G.992.3A (ADSL2 Annex A)
  • G.992.3L (ADSL2 Annex L)
  • G.992.5 (ADSL2+)
  • GR-TSY-000057
  • GR-TSY-000303
  • GR-TSY-000008
  • GR-63-CORE
  • GR-1089-CORE
  • ANSI T1.413-1998
  • G.992.2
  • G.992.3
  • G.992.5
  • G.994.1
  • G.998.1
Environmentals
  • Altitude: Up to 10,000 feet
  • Temperature: -40° to +149° F (-40° to +65° C)
  • Relative Humidity: 5–95% noncondensing
Alarm / Monitor / Test
  • DSL loop diagnostics
  • Single Ended Line Test (SELT)
  • Supports metallic test access
  • Performance Monitoring
Power Consumption
  • Power consumption: 21.56W (100% DSL lines trained and 6 CCS voice)
  • Input impedance: 100 ohms @ 30 kHz to 2.2 MHz
  • Low-power mode, during port inactivity, can be provisioned in seconds
  • Configurable power shut-off feature, during battery backup conditions
Interfaces
  • Integrated VDSL2, ADSL2+ and POTS (6+6) interface
Physical
  • Height: 5.125 in (13.018 cm)
  • Width: 0.563 in (1.429 cm)
  • Depth: 10.5 in (26.67 cm)
  • Weight: 0.5 lb (0.23 kg)
Product Specifications Sheet

VDSL2 6+6B Plug-in Card
Product Specifications
Related Services
Technical Support

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

Learn More
Professional Services

The right professional network services to help you successfully plan, design, install, and operate your network.

Learn More
Digital Credentials

Digital versions of your Tellabs-earned training credentials that can be used in email signatures, digital resumes, and on social media sites.

Learn More
Training

Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Learn More

Similar Products

ADSL2+ 6+6B Plug-in Card

T1000
  • Integrated DSL+POTS (6+6) interface enables you to cost-effectively support a 100% take-rate of IPTV and High Speed Internet (HSI) services on day one.
  • The ADSL2+ 6+6B card provides bit rates up to 24 Mbps downstream and over 1.4 Mbps upstream on a single copper pair.
  • By bonding two adjacent ports, you can achieve 48 Mbps downstream and over 2.8 Mbps upstream.
  • Higher bit rates help you keep up with the growing broadband demands of IPTV, VoD, HSI and Over-the-Top services.

ADSL2+ 6+0B Plug-in Card with Bonding

T1000
  • Dual memory for minimal service-affecting upgrades
  • Compatible with both CPU-2 and CPU-3
  • High performance provides higher bit rate and broader reach
  • Six integrated ports of ADSL2+ (with bonding capability) and POTS
  • Up to 20 cards per Tellabs 1000 MSAP shelf
  • Low power/heat dissipation for increased capacity
  • Supports ADSL2 Reach Extended (RE) option for longer reach
  • Provides ADSL2 power saving states
  • Up to 48 VCCs per card
  • Unspecified Bit Rate (UBR), Constant Bit Rate (CBR) and Variable Bit Rate Real Time (VBRrt)
  • Receives and responds to F5 Operations and Maintenance (OAM) loopback cells

Related Products

Small 1048 Channel Bank Assembly (CBA)

T1000
  • Supports traditional narrowband and modern broadband services
  • Equip with TDM, SONET or Ethernet plug-in cards
  • Capable of 100% xDSL fill rate
  • -48v power rail to all slots
  • Rapid deployment from any existing cabinet
  • Full NMS control integrates existing access networks
  • Alarm contact closure wire-wrap posts
  • Wire-wrap backplane only for complete flexibility on a slot per slot basis
  • On-board craft port with A/B switch for modem interface
  • Variable speed fan tray assembly
Email Us
To place an order or reach customer service, email directly at
Enterprise
Tellabs-Enterprise-OM@tellabs.com
Broadband
Tellabs-Broadband-OM@tellabs.com
Technical Support
technical.services@tellabs.com
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
+1 972 588 7000
Technical Assistance Center (TAC)
+1 800 690 2324