Contact
Featured Post
Just 1-2-3 steps to install our Tellabs ONT140W makes it as easy to learn as your ABCs
Read More
Featured Post
Top 5 blogs help accelerate awareness and engagements by a factor of 5!
Read More
Top Categories:

FlexSym Optical Network Terminal 202 (ONT202)

Optical LAN
  • Plenum rated with metal enclosure, integrated fiber management and multiple mounting options
  • Two multi-rate Ethernet ports supporting 10G/5G/2.5G/1G and the other supporting 2.5G/1G/100M
  • Power over Ethernet (PoE) 802.3af, 802.3at, 802.3bt (4PPoE), and UPoE with 60W per port capacity
  • Local and remote powering choices are supported with both Phoenix and Molex connectors
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Industrial temperature and power supply for use in outdoor rated NEMA enclosures

FlexSym Singlemode Fiber to Multimode Fiber Modal Adapting Jumper

Optical LAN
  • Supports any length of SMF from the Tellabs OLT through the splitter up to the limit of the 28dB optical budget
  • Allows re-use of multimode fiber cabling from the splitter location to where the ONTs are mounted (all Tellabs ONT models are supported)
  • Economical one-to-one MMF cabling solution without stranding ports on passive optical splitters
  • Eliminates the cost of installing new singlemode fiber in the horizontal pathways and the final access drops
  • Two versions available for SMF SC/APC connector on OLT/splitter side and MMF ST/UPC connector on ONT side in 3-meters length, plus SMF SC/APC connector on OLT/splitter side and MMF LC/UPC connector on ONT side in 3-meters length.
  • Allows full rate PON service over multimode fiber cabling up to 550 meters
  • Qualified for OM1, OM2, and OM3 multimode fiber cable types
  • Completely passive operation, no power or maintenance required

FlexSym Optical Line Terminal One (OLT1)

Optical LAN
  • Up to 512 ONTs (64-way optical split) and up to 4,096 Ethernet port
  • 4-ports gigabit Ethernet and 2-ports 10 gigabit Ethernet network uplink interfaces
  • 1 rack unit, 19” form factor. AC powered with redundant power supplies.
  • 8-port PON service module with XFP selectable 10G XGS-PON or G-PON connectivity
  • Highly secure with bi-directional AES128 encryption with churning keys
  • Leverages centralized intelligence with software defined networking management
  • Environmentally hardened for support of a wide variety of mounting options
  • Small form-factor overlay of existing 3rd-party G-PON installs with Tellabs' 10G XGS-PON

FlexSym Optical Network Terminal 248 (ONT248)

Optical LAN
  • Economical one-to-one closet-based legacy switch replacement
  • Reuse the last 100m CATx cables in the horizontal, walls and drops
  • Achieve lower IT support and maintenance costs
  • Remove points of known network vulnerabilities
  • Reduce fiber cabling building-to-building and floor-to-floor
  • Gain extended temperature range inside IT equipment rooms
  • Support IoT, smart buildings, Wi-Fi, digital ceiling and LED lighting
  • Migrate to deep fiber design or combining with deep fiber

FlexSym XGS-PON Combiner

Optical LAN
  • Optimized interworking with Tellabs Optical LAN equipment inside buildings and across a campus
  • Tellabs FlexSym XGS-PON Combiner mounts in standard LGX enclosure
  • Combines G-PON and 10G XGS-PON wavelengths onto a single fiber enabling G-PON and 10G across same optical infrastructure
  • Provides optimal upstream filtering to eliminate any unwanted wavelengths maximizing efficiency
  • Connected ONTs can be either G-PON, or 10G XGS-PON, and either closet-based, or deep fiber placement
  • Economical overlay of existing 3rd-party G-PON installs with Tellabs FlexSym Series 10G XGS-PON solution

FlexSym Optical Interface Unit Eight (OIU8)

Optical LAN
  • Open-source and standards-based Software Defined Networking (SDN) ready, plus NG-PON2 capable with future software
  • 8-port PON service module with XFP selectable ITU-T 984 G-PON 2.5G or ITU-T G.9807/G.987 XGS-PON symmetrical 10G connectivity
  • XGS-PON bi-directional AES128 Encryption with churning key with Tellabs FlexSym ONT205
  • Compatible with QOIU7 for cost-effective and graceful migration from G-PON 2.5G to XGS-PON 10G and then NG-PON2 40G
  • Enterprise data including wireless access, access control, security, surveillance, building environment and automation
  • Environmentally-hardened for remote deployments in areas with no air conditioning nor heating

FlexSym Optical Network Terminal 205 (ONT205)

Optical LAN
  • Supports Dante and CobraNet digital audio systems over IP
  • Bi-directional AES-128 encryption with 60 second churning of keys
  • Enclosure's fire retardant plastic passes plenum fire test
  • Four (4) 10/100/1000 and one (1) 10G interface with Power over Ethernet support for 4PPoE supporting 802.3af/at/bt
  • Overlay ITU 984 G-PON ONTs with ITU G.9807.1 XGS-PON 10G ONT on same fiber protecting existing infrastructure investments
  • Deliver 10G capacity only where necessary to optimize space, energy and monetary issues associated with 10G
  • ONT205 supports 1G, 2.5G, 5G and 10G as needed properly aligning network design with true traffic requirements
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
Email Us
To place an order or reach customer service, email directly at
Enterprise
Tellabs-Enterprise-OM@tellabs.com
Broadband
Tellabs-Broadband-OM@tellabs.com
Technical Support
technical.services@tellabs.com
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
+1 972 588 7000
Technical Assistance Center (TAC)
+1 800 690 2324