Featured Post
Just 1-2-3 steps to install our Tellabs ONT140W makes it as easy to learn as your ABCs
Featured Post
Top 5 blogs help accelerate awareness and engagements by a factor of 5!

10 Gigabit Ethernet 226 (GbE226)

T1000
  • Two 1G/10G Ethernet ports enhanced small form-factor pluggable (SFP+)
  • Four 10/100/1000 Ethernet ports small form-factor pluggable (SFP)
  • Up to five (5) ports can be configured for aggregation
  • QoS via IEEE 802.1P priority bits
  • IPv4 and IPv6 transparency
  • Six-Port Ethernet switch with flexible uplink and tributary functionality
  • Configurable Layer-2 learning
  • Spanning Tree forwarding
  • 1526 Byte Maximum Transmission Unit (MTU)
  • Standard SNMP based Ethernet statistics
  • Hardware support for future Synchronous Ethernet (SyncE) and IEEE 1588 Precision Time Protocol (PTP) timing

Remote Broadband Cabinet 52EU (RBC52EU) 1000-Line

T1000
  • In controlled environments, if the composite clock signal degrades, ETI provides Stratum 3E holdover using historical timing data
  • Provisionable Stratum levels: 3, 3 with 3E holdover, 4, and SONET
  • LET or RST operation (primary shelf)
  • Up to Stratum 3/3E free-run accuracy
  • Jitter and wander reduction of external timing source
  • A second ETI can be installed for standby operation
  • Telcordia compliant design cabinet is expandable from four shelves to eight
  • Fiber splice and distribution options
  • -48 VDC powered cooling fans
  • Separate vented battery compartment and battery back-up options
  • Standard surge protection
  • Copper line protection in separate compartment (non-cross-connect configurations)
  • Hex key lock (padlockable for additional security)
  • Synchronizes to an external composite clock timing source

1RU Fan Tray Unit

T1000
  • Temperature control and fan speed control
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • A test switch on the fan tray front panel allows the fans to be manually tested for correct functioning.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
  • In the event of fan tray failure, the fan tray alarm relays communicate with the appropriate alarm monitoring interface.
  • Cold rolled steel, zinc plated per ASTM-B633 Type II gold sheet metal enclosure with six fans
Email Us
To place an order or reach customer service, email directly at
Technical Support
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
Technical Assistance Center (TAC)