OC12c Transceiver (OC12c-XCVR)

SKU: 0120-0166 Category:

The Optical Carrier Level 12 Transceiver
(OC12c-XCVR) plug-in card has more bandwidth for more revenue generating
services and transport. It functions as an uplink to an ATM network and as a high-rate, point-to-point transport between Tellabs 1000 MSAP series terminals. The OC12c-XCVR card is compatible with SONET OC-12c standards per GR 253-CORE. The OC12c-XCVR plug-in card has a 622 Mbps fiber optic interface using Intermediate Range Optics. Both a transmitter and a receiver are on a single card.

Additional information

Weight 0.8 kg
Dimensions 13.5 × 6 × 1.5 cm
Solution

Broadband

Material Status

Production

  • Provides a full 622 Mbps physical interface on 1310 nm single-mode fiber for its OC12c interface using two fibers - one transmit and one receive
  • Functions as an uplink to an ATM network or an inter-terminal transport.
  • SONET Automatic Protection Switching (APS) 1+1 enabled when provisioned as an uplink
  • GR-253 Intermediate Reach compatible (GR-253-CORE)
  • Supports 2048 virtual channel connections
  • Dual-memory for non-service affecting programming
  • SC Connectors for easy installation

Flexible Transport

As a general purpose interterminal transceiver, the OC12c-XCVR carries both TDM and ATM traffic: TDM traffic is converted to ATM cells. 50 Mbps are reserved for the TDM backplane. The OC12c-XCVR contains Tellabs next generation ASIC, the Pathfinder, which is a key differentiator and technology enabler providing access to the ATM cell bus. The Pathfinder functions as an "ATM switch on a chip" providing ATM switching, QoS, concentrator capabilities, and conversion of TDM traffic to ATM and back to TDM.


Video Delivery

As a video uplink to the ATM data network, the OC12c-XCVR interfaces to any UNI 3.1 and UNI 4.0 compliant ATM switch or router. As an ATM uplink, the card supports a 500 Mbps payload for use as a video network uplink. Automatic Protection Switching (APS 1+1) is enabled when the card is provisioned as an uplink.


Low Power and Thermals

The OC12c-XCVR card uses powering and heat dissipation technologies available in the Tellabs 1000 MSAP terminal can operate in any of the shelf's 22 general purpose slots.


High Availability

High network availability is supported with the by equipping a Tellabs 1000 MSAP system with two (2) OC12c-XCVR plug-in cards. This configuration assures system, card level and per port level redundancy.

Physical

  • Height: 5.125 in (13.018 cm)
  • Width: 0.563 in (1.429 cm)
  • Depth: 10.5 in (26.67 cm)
  • Weight: 0.5 lb (0.23 kg)

Interfaces
  • Single-mode laser operating at 1310 nm.
  • Full-duplex Transmit and Receive
  • SC Connectors for easy installation
  • PIN receiver

Power Consumption
  • Maximum power consumption:
  • Typical power consumption: 8 W

Environmentals
  • Temperature: -40° to +158° F (-40° to +70° C)
  • Relative Humidity: 5-95% noncondensing
  • Altitude: Up to 10,000 feet

Compliance
  • GR-253-CORE
  • ATM UNI 3.0, 3.1, 4.0

General
  • Signaling Line coding: Binary Non-Return to Zero (NRZ)
  • Signaling Line rate: 622.08 Mbps
  • Transmitter Min Launched Power: -15dBm
  • Transmitter Max Launched Power: -8dBm
  • Receiver Sensitivity: -28dBm
  • LED Indicators
  • FAIL (red)
  • ACTIVE (green)
  • SYNC (green)
  • LOC REM (red)

Management
  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS)

Software Support
  • Minimum base software FP16 and higher

Installations
  • Supported in Tellabs 1000 CBA

Ordering Information
  • OC12c-XCVR: 0120-0166

OC12c Transceiver (OC12c-XCVR)

SKU: 0120-0166 Category:

The Optical Carrier Level 12 Transceiver
(OC12c-XCVR) plug-in card has more bandwidth for more revenue generating
services and transport. It functions as an uplink to an ATM network and as a high-rate, point-to-point transport between Tellabs 1000 MSAP series terminals. The OC12c-XCVR card is compatible with SONET OC-12c standards per GR 253-CORE. The OC12c-XCVR plug-in card has a 622 Mbps fiber optic interface using Intermediate Range Optics. Both a transmitter and a receiver are on a single card.

OC12c Transceiver (OC12c-XCVR)

Features

  • Provides a full 622 Mbps physical interface on 1310 nm single-mode fiber for its OC12c interface using two fibers - one transmit and one receive
  • Functions as an uplink to an ATM network or an inter-terminal transport.
  • SONET Automatic Protection Switching (APS) 1+1 enabled when provisioned as an uplink
  • GR-253 Intermediate Reach compatible (GR-253-CORE)
  • Supports 2048 virtual channel connections
  • Dual-memory for non-service affecting programming
  • SC Connectors for easy installation

Highlights

Flexible Transport

As a general purpose interterminal transceiver, the OC12c-XCVR carries both TDM and ATM traffic: TDM traffic is converted to ATM cells. 50 Mbps are reserved for the TDM backplane. The OC12c-XCVR contains Tellabs next generation ASIC, the Pathfinder, which is a key differentiator and technology enabler providing access to the ATM cell bus. The Pathfinder functions as an "ATM switch on a chip" providing ATM switching, QoS, concentrator capabilities, and conversion of TDM traffic to ATM and back to TDM.


Video Delivery

As a video uplink to the ATM data network, the OC12c-XCVR interfaces to any UNI 3.1 and UNI 4.0 compliant ATM switch or router. As an ATM uplink, the card supports a 500 Mbps payload for use as a video network uplink. Automatic Protection Switching (APS 1+1) is enabled when the card is provisioned as an uplink.


Low Power and Thermals

The OC12c-XCVR card uses powering and heat dissipation technologies available in the Tellabs 1000 MSAP terminal can operate in any of the shelf's 22 general purpose slots.


High Availability

High network availability is supported with the by equipping a Tellabs 1000 MSAP system with two (2) OC12c-XCVR plug-in cards. This configuration assures system, card level and per port level redundancy.

Specifications

Physical

  • Height: 5.125 in (13.018 cm)
  • Width: 0.563 in (1.429 cm)
  • Depth: 10.5 in (26.67 cm)
  • Weight: 0.5 lb (0.23 kg)

Interfaces
  • Single-mode laser operating at 1310 nm.
  • Full-duplex Transmit and Receive
  • SC Connectors for easy installation
  • PIN receiver

Power Consumption
  • Maximum power consumption:
  • Typical power consumption: 8 W

Environmentals
  • Temperature: -40° to +158° F (-40° to +70° C)
  • Relative Humidity: 5-95% noncondensing
  • Altitude: Up to 10,000 feet

Compliance
  • GR-253-CORE
  • ATM UNI 3.0, 3.1, 4.0

General
  • Signaling Line coding: Binary Non-Return to Zero (NRZ)
  • Signaling Line rate: 622.08 Mbps
  • Transmitter Min Launched Power: -15dBm
  • Transmitter Max Launched Power: -8dBm
  • Receiver Sensitivity: -28dBm
  • LED Indicators
  • FAIL (red)
  • ACTIVE (green)
  • SYNC (green)
  • LOC REM (red)

Management
  • Craft User Interface (CUI)
  • Tellabs Panorama Element Management System (EMS)

Software Support
  • Minimum base software FP16 and higher

Installations
  • Supported in Tellabs 1000 CBA

Ordering Information
  • OC12c-XCVR: 0120-0166

News Releases

Corporate news releases recognizing significant achievements of Tellabs operations, products, solutions and customers.

Case Studies

Hear directly from our customers about their successful installations, quantifiable benefits and sincere testimonials.

Events

Up-coming conferences, seminars and webinars where Tellabs products, solutions and people will be actively participating.

Blogs & Articles

Read these short, and regularly updated, opinion pieces covering contemporary industry and technology topics.

White Papers

Download our non-vendor specific overviews meant to help readers understand an issue, solve a problem, or make a decision.

Videos

Media to educate and advocate our products, technologies or services, and offer direct insight into our customer references and user case studies.

Enterprise

Tellabs Optical LAN is a true enterprise centric solution that offers a better means of designing and operating networks inside buildings and across extended campuses.

Broadband

Tellabs 1000 MSAP (aka T1000, DMAX, AFC, UMC) is the industry’s only Broadband Digital Loop Carrier platform that converges legacy copper and modern fiber connectivity.

Technical Assistance Center

Address your questions and challenges quickly with our award winning TAC. Flexible support options to meet your needs.

Professional Services

From small projects to migrations to full turn key services, Tellabs is here to help.

Training

Preparation is the key to success.  Get your team ready to plan, deploy and manage your Tellabs Network. Check our our Training Curriculum today!

Credentials

You worked hard in Training, now it's time to show your new credentials off to the World through our Digital Credentialing Program!

Become a Partner

The Tellabs Advantage Partner Program is designed to offer our partners exceptional opportunities to grow your business, increase revenue and gain unique solution differentiation.

Find a Partner

For our end-customers, our Tellabs Advantage Partner Program offer best-in-breed services that match specific vertical markets and geographical regions with the end-customers exact needs in mind.

Leadership

Meet the Tellabs leadership team that represents diverse areas of expertise, and who are committed to exceeding the expectations of our employees, partners and customers.

Careers

Visit Tellabs’ online careers pages to see if there is a job opportunity that matches your ambitions. We offer excellent pay, benefits and career advancement possibilities.

Contact

Tellabs offer several easy options for contacting us. You can connect with us today via phone, email, online forms, or through social media channels.