Tellabs Products
From entertainment and telecom in the home to patient information in healthcare, from financial data to homeland security; fast and secure access has never been in more demand. Tellabs' sole focus is to deliver secure, scalable, sustainable access to optimize network performance.

Tellabs Network Solutions

Tellabs Optical LAN delivers a network that is faster, more efficient, sustainable, cost effective, scalable and adaptable to future requirements than traditional copper-based infrastructure. Optical LANs eliminate the distance constraints, power requirements and heat dispersion issues of copper. They deliver increased network security, performance and operational efficiency. There is no doubt: Optical LAN is the future of enterprise access networks.
Tellabs Broadband provides an end-to-end cost-effective access solution that passes more than 5 million homes in North America. Our Multi-Service Access Platform (MSAP) enable you to get the most from your existing infrastructure. You'll save costs by reducing power consumption while gaining revenue opportunities by delivering services faster. Tellabs T1000 - the industry’s only Broadband Digital Loop Carrier platform that converges legacy copper and modern fiber connectivity.
(16 Matches)

FlexSym Optical Interface Unit Eight (OIU8)

Optical LAN
  • Open-source and standards-based Software Defined Networking (SDN) ready, plus NG-PON2 capable with future software
  • 8-port PON service module with XFP selectable ITU-T 984 G-PON 2.5G or ITU-T G.9807/G.987 XGS-PON symmetrical 10G connectivity
  • XGS-PON bi-directional AES128 Encryption with churning key with Tellabs FlexSym ONT205
  • Compatible with QOIU7 for cost-effective and graceful migration from G-PON 2.5G to XGS-PON 10G and then NG-PON2 40G
  • Enterprise data including wireless access, access control, security, surveillance, building environment and automation
  • Environmentally-hardened for remote deployments in areas with no air conditioning nor heating

FlexSym Optical Network Terminal 205 (ONT205)

Optical LAN
  • Supports Dante and CobraNet digital audio systems over IP
  • Bi-directional AES-128 encryption with 60 second churning of keys
  • Enclosure's fire retardant plastic passes plenum fire test
  • Four (4) 10/100/1000 and one (1) 10G interface with Power over Ethernet support for 4PPoE supporting 802.3af/at/bt
  • Overlay ITU 984 G-PON ONTs with ITU G.9807.1 XGS-PON 10G ONT on same fiber protecting existing infrastructure investments
  • Deliver 10G capacity only where necessary to optimize space, energy and monetary issues associated with 10G
  • ONT205 supports 1G, 2.5G, 5G and 10G as needed properly aligning network design with true traffic requirements
  • Uses Tellabs’ industry-leading software-defined global profiles, traffic management, security, provisioning and traffic management mechanisms
  • Management can be server, laptop, tablet, cloud-based and lays the foundation for future software defined networking automation.

FlexSym Optical Network Terminal 248 (ONT248)

Optical LAN
  • Economical one-to-one closet-based legacy switch replacement
  • Power, cable, and cable management match closet-based traditional switch footprint
  • Reuse last 100m CATx cables that already exists in the horizontal, walls and drops
  • Fewer fiber cabling with multiple bidirectional wavelengths on single fiber reduce cabling
  • Lower, or eliminate, HVAC in the telecom closets with ONT temperature range +23°F to +131°F
  • Take advantage of OLAN’s more secure design with reduced network points of vulnerability

FlexSym Singlemode to Multimode 2×16 Splitter

Optical LAN
  • Supports OM1, OM2, OM3, and OM4 multimode fiber cabling
  • Completely passive operation with no power or maintenance required
  • Allows re-use of multimode fiber cabling from the splitter location to where the ONTs are mounted
  • Available in both 2x8 and 2x16 splitter versions
  • Optional support for Type-B PON redundancy adding additional resiliency to the network design
  • Eliminates the cost of installing new singlemode fiber in the horizontal pathways and the final access drops
  • Allows full rate G-PON service over MM fibers up to 550 meters
  • Supports any length of singlemode fiber from the Tellabs OLT to the splitter up to the limit of the 28dB optical budget

FlexSym Singlemode to Multimode 2×8 Splitter

Optical LAN
  • Eliminates the cost of installing new singlemode fiber in the horizontal pathways and the final access drops
  • Supports any length of singlemode fiber from the Tellabs OLT to the splitter up to the limit of the 28dB optical budget
  • Supports OM1, OM2, OM3, and OM4 multimode fiber cabling
  • Completely passive operation with no power or maintenance required
  • Allows re-use of multimode fiber cabling from the splitter location to where the ONTs are mounted
  • Available in both 2x8 and 2x16 splitter versions
  • Optional support for Type-B PON redundancy adding additional resiliency to the network design
  • Allows full rate G-PON service over MM fibers up to 550 meters
Email Us
To place an order or reach customer service, email directly at
Technical Support
Call Us
Call us for immediate customer service and assistance.
Corporate Headquarters
Technical Assistance Center (TAC)